The Lowest Car Production Level in the UK in 65 Years
Market News

The Lowest Car Production Level in the UK in 65 Years

According to figures from the Society of Motor Manufacturers and Traders (SMMT), car production in the UK last year fell to its lowest level since 1956.
Published: Mar 09, 2022
The Lowest Car Production Level in the UK in 65 Years

According to the SMMT figures, just under 860,000 new cars left UK factories last year. That was even fewer than in 2020, when the first wave of Covid and the associated lockdowns forced several factories to close. Production last year was 6.7% lower than in 2020 - and a full 34% below its pre-pandemic level.

The SMMT said the figures were dismal, largely due to a global microchip shortage and disruption caused by the coronavirus pandemic. It said there was optimism for the future, with the announcement of new investment worth nearly £5bn. But it warned high energy costs could be a challenge for carmakers this year. Hopes that car production would recover in 2021 were firmly dashed.

Chip Shortage

The main reason for the decline, the SMMT said, was a severe shortage of semiconductors, or computer chips. A modern car has complex electronics and can use between 1,500 and 3,000 chips to operate items such as engine management systems, emissions controls, safety devices and navigation systems. But there were other factors affecting the low production too.

The SMMT's chief executive Mike Hawes admitted it had been "a dismal year, there's no hiding it". But he suggested that "despite this miserable year there is optimism", largely because of the announcement of £4.9bn in planned new investments, many of them in electric vehicles or technology. These, he said, had been triggered by the signing of a Brexit deal with the EU, which had provided "a real shot in the arm", following five years of declining investment. But he added the UK was "still playing catch-up" after a long period of Brexit-related uncertainty.

"The industry did everything it could to be prepared for new post-Brexit trading arrangements, and largely that has been relatively smooth," he told the BBC's Today programme. "It has incurred additional costs though, because whilst we were able to benefit from the deal we have with the EU, which avoids tariffs, it doesn't avoid other tariff barriers and additional administration which has required additional people and additional costs to everyone, whether you are exporting or importing."

For the UK motor industry, the pandemic got here at simply the wrong time. Car manufacturing was already falling, and Brexit uncertainty made producers reluctant to make investments in Britain at a time when manufacturers were making massive plans for a new era of electric powered vehicles.

The trade deal with the EU solved that hassle - however it came in the middle of a Covid outbreak which induced a wave of new issues. The scarcity of pc chips is world-wide and producers around the world have been struggling to deal with it. But at a time when the UK auto industry should have been focusing on making up lost ground, it was once again left managing a crisis. The past year has been actually depressing for the sector.

Nevertheless, new investment is now coming in, and that momentum now has to be sustained if the UK is truly to become a force in the new market for electric vehicles.

Electric Future

Despite the established malaise in the industry, manufacturing of electric and hybrid motors rose by almost 30% and accounted for almost a quarter of all the automobiles built.

Van production, which is becoming an increasingly important part of the UK motor industry, was also strong, with output recovering to just 3% below its pre-pandemic level. Demand for these vehicles has been soaring due to the popularity of online shopping and home deliveries. Independent forecasts produced for the SMMT suggest that production will rise by nearly 20% next year, to more than one million vehicles.

Van production, which is turning into a more and more essential section of the UK motor industry, was also strong, with output recovering to simply 3% under its pre-pandemic level. Demand for these cars has been soaring due to the reputation of online buying and domestic deliveries. Independent forecasts produced for the SMMT suggest that manufacturing will rise by almost 20% the subsequent year, to more than one million vehicles.

But the organization said that until new players come into the market, the industry is not likely to return to the output levels seen five years ago, when some 1.7 million automobiles left UK factories. That is due to the closure of Honda's Swindon plant, and the selection to make trucks as a substitute of automobiles at Vauxhall's manufacturing unit in Ellesmere Port. The chip shortage, meanwhile, is predicted to continue to affect manufacturing in the first part of this year, but will become less severe after that.

The industry is also facing another very big challenge; sharply rising energy costs. "Escalating energy costs threaten not only the viability of vehicle plants, but also our competitive position,"Mr. Hawes said. "We already pay more in energy costs here in the UK than in competitor countries across Europe and beyond, so we need to make sure we can try and mitigate those price rises to ensure we can remain competitive."

Published by Mar 09, 2022 Source :BBC News

Further reading

You might also be interested in ...

Headline
Market News
Europe’s Rising Demand for Seaweed: From a “Slimy” Reputation to a Health Trend-How Buyers and Brand Owners Can Evaluate Supply, Applications, and Market Opportunities
Why Seaweed Is Becoming a Strategic Ingredient Opportunity in Europe
Headline
Market News
TaipeiPLAS 2026: Driving Smart Manufacturing and Supply Chain Resilience in Plastics and Rubber
TaipeiPLAS 2026 returns to TaiNEX 1 from Sept. 15-19, showcasing Taiwan's premier smart plastics and rubber machinery ecosystem, sustainable low-carbon workflows, and automation turnkey solutions for global buyers.
Headline
Market News
From Carbon Management to Material Selection: Why High-Performance Construction Screws Are Re-entering the Green Building Conversation
When people discuss green building, the spotlight usually falls on insulation, low-carbon concrete, recycled materials, high-efficiency glazing, or renewable energy systems. Yet as ESG standards, carbon disclosure requirements, and lifecycle-based procurement continue to reshape the construction industry, another category is quietly being reassessed: fasteners and building screws. This shift reflects a broader market reality. Sustainable construction is no longer judged only by whether major materials are labeled “green.” It is increasingly evaluated by whether the entire building system can deliver longer service life, lower maintenance demand, easier repair, reduced waste, and better compliance performance. In that context, the humble construction screw is no longer just a low-cost fixing component. It is becoming part of the larger conversation around durability, lifecycle value, and environmental responsibility. For buyers, project owners, architects, and contractors, this matters more than it may first appear. Screws are low-cost items individually, but they are used in very large quantities. Once issues such as corrosion, installation inefficiency, maintenance difficulty, or compliance gaps are multiplied across a full project, the consequences become significant in both operational and environmental terms.
Headline
Market News
JIMTOF 2026 at Tokyo Big Sight: Dates, Key Features, and Taiwan Spotlight
JIMTOF 2026, the 33rd JAPAN INTERNATIONAL MACHINE TOOL FAIR, will take place at Tokyo Big Sight from October 26 to 31, 2026. The event will feature machine tools, accessories, precision instruments, software, and related manufacturing technologies.
Headline
Market News
How Takeout Growth Is Expected to Reshape Demand for Paper Containers Manufacturers
A market outlook on how off-premises dining may influence future opportunities for paper packaging manufacturers.
Headline
Market News
Why Lithium-Ion Is Leading the Electric Forklift Shift - Charging, Maintenance, and Total Cost Considerations
As warehouses, factories, and logistics operators accelerate electrification, the discussion is no longer limited to whether companies should move from internal combustion forklifts to battery-powered models. The more practical question today is: which battery technology can better support uptime, safety, labor efficiency, and long-term cost control? For many buyers, lithium-ion is becoming the preferred answer. The electric forklift market is evolving from a simple power-source comparison into a broader evaluation of charging speed, maintenance workload, space planning, shift coverage, and total cost of ownership. Against this backdrop, lithium-ion technology is gaining strong momentum, especially in electric counterbalance forklift applications where stable performance, operational flexibility, and low downtime are critical. This article examines why lithium-ion is becoming a leading technology in electric forklifts, with a particular focus on charging and maintenance—the two issues procurement teams, plant managers, and business owners most often need to evaluate before making an investment.
Headline
Market News
How Integrated Recycling Pelletizing and Blown Film Lines Drive Sustainable Packaging
The push for sustainability in the plastics industry is accelerating globally. Manufacturers face rising raw material costs, waste management challenges, and increasing ESG regulations. Integrated recycling and blown film lines offer a practical solution, converting post-consumer or production scrap into high-quality packaging films while improving operational efficiency.
Headline
Market News
Profitability and Precision: The Hidden ROI of High-Performance Tool Holders in B2B Manufacturing
In the high-pressure environment of B2B manufacturing, the line between profit and loss is often drawn on the shop floor. Procurement managers and factory owners are constantly bombarded with cost-saving initiatives. Usually, these focus on negotiating raw material prices or reducing energy consumption. However, one of the most significant levers for profitability is often overlooked because it is viewed as a simple consumable: the Tool Holder.
Headline
Market News
Ensuring Safety and Efficiency in Can-Making Equipment for High-Corrosion, High-Pressure Applications
In industrial packaging—particularly for chemicals, paints, and coatings—three-piece metal cans must endure extreme conditions: aggressive chemical formulations, internal pressurization, and long-term storage stability. Unlike beverage or food-grade containers, these applications demand superior corrosion resistance, leak-proof sealing, and structural robustness. Meeting these requirements starts not with the can itself, but with the can-making equipment that produces it. Manufacturers like Shin-I Machinery Works Co., Ltd. are rising to this challenge, offering specialized machinery designed explicitly for non-food, high-performance packaging. This article explores the critical design and production considerations for industrial three-piece cans, outlines key equipment selection criteria, and highlights leading global suppliers—including Shin-I—serving this demanding sector.
Headline
Market News
How Patented Screws Enhance Precision and Sustainability in Modular Projects
From Factory Precision to On-Site Efficiency: The Impact of Patented Screws on Modular Assembly
Headline
Market News
Mastering Aluminum Cutting - How Band Saw Machines Support EV and Aerospace Manufacturing
The growth of electric vehicles (EVs) and the aerospace industry has dramatically increased demand for advanced aluminum processing solutions. Aluminum’s high thermal conductivity and susceptibility to deformation require specialized cutting tools capable of precise, consistent cuts. Band saw machines have become central to this evolution, providing manufacturers with the control and efficiency needed to meet stringent specifications.
Headline
Market News
Recycled Plastics & Blow Molding - Equipment Trends Enabling a Circular Packaging Economy
The following article reviews how Plastic Blow Molding Machines are being adapted to process higher shares of recycled plastics (PCR and mechanically/chemically recycled streams). It evaluates machine design trends—full-electric drives, multi-layer co-extrusion, accumulator systems—and summarizes implications for manufacturers and brand owners. Key industry players are highlighted for context.
Agree