In the Face of the Epidemic, How Does the Telemedicine System Get Ahead of Its Subordinates?
Knowledge

In the Face of the Epidemic, How Does the Telemedicine System Get Ahead of Its Subordinates?

In the face of the spread of the epidemic, people minimize their chances of contacting people when going out, but how should the necessary medical services be solved? The telemedicine consultation will be used to advance subordinates and provide remote medical interviews and consultations that do not require contact.
Published: Dec 08, 2021
In the Face of the Epidemic, How Does the Telemedicine System Get Ahead of Its Subordinates?

What Is Telemedicine Consultation?

Definition of telemedicine consultation

Telemedicine consultation is the use of information and telecommunications technology to exchange medical and clinical data and expert opinions from patients in two places to overcome obstacles in space and even time.

The scope of application of telemedicine consultation
  • Follow-up treatment of acute inpatients within 3 months after discharge
  • Residents of residential long-term institutions require medical treatment by doctors of the medical institution due to their medical conditions
  • Patients under the integrated care regulations of family doctors need to be diagnosed and treated by family doctors due to their condition
  • Follow-up treatment related to laws and regulations related to home care
  • Overseas patients who have not participated in the National Health Insurance
Steps in telemedicine consultation
  1. Step 1: Planning consultation
    First, confirm whether the institution, department, and doctor you want to see provides telemedicine consultations. Some medical institutions only open specific departments, some only provide patients for follow-up consultations, and some are fully open.
  2. Step 2: Start connection
    To ensure a smooth connection during the consultation, it is recommended to find a smooth and quiet environment for the Internet to maintain the quality of audio and video and diagnosis and treatment.
    After the connection is successful, according to laws and regulations, you must present your health insurance card or other documents to confirm your identity. If it is through voice communication, at least you need to inform the physician of your personal information to confirm your identity. To maintain the privacy of both parties, it is necessary to confirm who is in each other's space, and if it is necessary to record because of need, the consent of both parties should be obtained.
    Remarks: It is necessary to understand that telemedicine consultations are limited. For example, although medical history can be obtained, some palpation and special physical examinations may not be performed, and there is no way to obtain imaging examination information in real-time.
  3. Step 3: Confirm purpose and quick assessment
    It is best to tell the doctor the purpose of the medical treatment first. Common purposes include pain control (drugs, etc.), examination and evaluation, arranging treatment, tracking the status, second opinion consultation, issuing medical certificates, referral recommendations, etc.
    If it is the first visit, tell the doctor clearly where the pain is and describe the cause of the pain or injury in detail. If you need to use accident insurance or medical insurance, you also need to clarify the needs at the beginning.
  4. Step 4: Describe the medical history
    To allow doctors to obtain sufficient information and improve the efficiency of diagnosis and treatment, it is recommended that you organize the following information before going to the doctor, including the location of the pain, the nature of the pain, the degree of the pain, the time when the pain occurred, the cause of the pain, the aggravating factor, the alleviating factor, etc. This information can help doctors determine the root cause of the problem and make a quick diagnosis.
    If you are an athlete or a sports enthusiast, tell the doctor your exercise type, training intensity, competition intensity, competition plan, and personal performance, so that the doctor will arrange your treatment direction more in line with your needs.
    Some chronic diseases, old injuries, or physical conditions may be related to the risk of injury, treatment planning, and drug choice. Therefore, it is best to sort out your chronic disease, injury history, surgery history, allergy history, and other information and tell the doctor.
  5. Step 5: Check
    After the doctor obtains the medical history, he will perform a physical examination to confirm the problem. As long as the light is sufficient, the image resolution is good enough, and the injured part can be exposed, the doctor can usually check whether the affected part is red, swollen, deformed, or bruised. If the injured place is behind the back and other parts that are difficult for you to present, you can ask others to assist in moving the camera to facilitate the observation of the doctor.
    The doctor may also ask the patient to perform movements, test the motion of the joints, and confirm whether the movements are painful. Some examinations can be performed by themselves or with the assistance of others under the guidance of a doctor, but there are still some examinations that rely on the experience of the doctor and may not be able to be performed during telemedicine consultations.
  6. Step 6: Listen to diagnosis and treatment
    After diagnosis, if the doctor has confirmed the diagnosis, he can listen to the doctor for analysis and discuss the treatment plan with the doctor. If the diagnosis is still not confirmed, the doctor may further arrange face-to-face consultation or arrange other instrumental examinations to clarify the patient's problem.
    If the symptoms are mild, the doctor may prescribe drugs or recommend home treatment. If you cannot handle it by yourself, you must cooperate with the doctor to arrange follow-up treatment in the hospital or refer to another expert for treatment. At this time, you should inform the doctor of your considerations and treatment preferences, so that the doctor can plan the most suitable treatment plan for the individual.
    At the end of the outpatient clinic, apart from making an appointment for the next follow-up time and asking about the follow-up treatment process, you only need to confirm the payment and medicine method with the institution and follow the instructions to complete the telemedicine consultation.
Benefits of telemedicine consultation
  • Forward triage:
    Before the patient arrives in the emergency department, through the video system, the medical staff can ask about the patient's condition and travel history and can observe the patient's breathing status on the screen to determine whether the patient needs to come to the hospital for treatment. In this way, the rate of contact between the patient and others can be reduced, and there is no time limit. Once the patient needs to come to the hospital for treatment, the patient-related information has already been obtained, which can also speed up the time for rapid screening.
  • People in home isolation or home quarantine:
    This is also a project currently being implemented by the Ministry of Health and Welfare. For some less complicated cases, telemedicine consultation should also be able to meet their medical or health needs.
  • Home screening:
    After the video assessment, medical staff can go to the patient’s home for examination for some high-risk and bed-ridden patients.
  • Sub-specialist consultation:
    Not limited by space and time, in an emergency, the sub-specialist consultation function can be activated at any time, so that the patient's diagnosis and treatment will be more accurate.
Future trend of telemedicine consultation

Telemedicine consultation is bound to become a trend in the future. Combining wearable devices, artificial intelligence assistance, mobile payment, and other online service modes will change the way of medical treatment and improve convenience in the future.

Published by Dec 08, 2021 Source :commonhealth, Source :commonhealth

Further reading

You might also be interested in ...

Headline
Knowledge
Medical Consumables: Global Guardians of Health
Medical consumables are a wide range of products used by healthcare professionals on a daily basis, typically for a single use before being disposed of. Their primary purpose is to ensure patient care, maintain hygiene, and prevent the spread of infection. These items are crucial for everything from routine checkups to complex surgical procedures.
Headline
Knowledge
Closed Suction System: Revolutionizing Respiratory Care
In critical care, airway management is a vital part of sustaining a patient's life. When patients rely on ventilators, clearing respiratory secretions becomes a crucial aspect of daily care. This seemingly simple, yet critically important, procedure has undergone significant evolution over the past few decades, progressing from early open suctioning to today's more advanced and safer Closed Suction System (CSS).
Headline
Knowledge
Understanding Plastic Materials: A Professional Analysis and Application Guide
Plastic materials, due to their diverse properties and wide range of applications, have become indispensable in modern industries and daily life. Choosing the right plastic material for different needs is crucial for optimizing product performance and achieving environmental benefits. The following is a professional review of the characteristics, applications, and pros and cons of the main plastic materials.
Headline
Knowledge
Exploring Rubber Processing Technology: Core and Challenges of Modern Manufacturing
Rubber processing is one of the most critical stages in modern manufacturing. From vehicle tires to industrial equipment seals and various consumer goods, rubber materials are everywhere. As the demand for high-quality and efficient products rises, rubber processing technologies continue to evolve. This article explores the basic knowledge of rubber processing, key technologies, and future trends.
Headline
Knowledge
Understanding the Coffee Robot: A Comprehensive Analysis
This article provides a comprehensive overview of coffee robots—automated machines that brew and serve coffee using advanced robotics and artificial intelligence. It outlines their key features, including AI-driven customization, app connectivity, 24/7 efficiency, and diverse drink options. The report also examines their growing impact on the coffee industry, highlighting benefits for both consumers and businesses such as convenience, consistency, and reduced labor costs. Case studies like CafeXbot, Artly Coffee, and Rozum Café illustrate how coffee robots are reshaping the coffee experience and driving market growth worldwide.
Headline
Knowledge
Understanding PU Foam: Properties, Types, and Industrial Uses
PU foam is no longer merely a cushioning material. It has become a core functional component across sports, medical, fashion, and lifestyle industries. By adjusting density, thickness, and surface feel, PU can meet diverse requirements for breathability, antimicrobial performance, durability, and comfort. It also aligns with brand trends toward eco-friendly formulations and recyclable material solutions.
Headline
Knowledge
Understanding Helical Filters: A Comprehensive Overview
Helical filters are essential components in radio frequency (RF) and microwave engineering, playing a key role in signal filtering and processing. Known for their compact size, high Q-factor, and broad frequency range, these filters are widely used across various industries. This report provides an in-depth look at helical filters, including their structure, operating principles, advantages, limitations, and typical applications.
Headline
Knowledge
Boost Your Device’s Performance: A Guide to Choosing the Right Power Supply
Choosing the right power supply unit (PSU) is crucial for maximizing your device's performance, ensuring stability, and prolonging the lifespan of your components. A PSU is not just a simple component that provides power; it is the heart of your system that ensures each component receives the right amount of power safely and efficiently. This report will guide you through the essential considerations and steps to select the ideal PSU for your needs.
Headline
Knowledge
How to Choose the Ideal Wood Screws for Furniture and Cabinetry
Selecting the right wood screws is essential to building strong, stable, and visually appealing furniture or cabinets. Key factors include screw size, length, thread type, head style, and compatibility with different wood materials. Coarse threads suit softwoods, while fine threads are better for hardwoods. Choosing the proper head type ensures both function and aesthetics, while accounting for environmental changes helps maintain joint integrity. Pre-drilling pilot holes can also prevent splitting, especially in dense wood. By understanding these considerations, woodworkers can achieve durable, high-quality results in their projects.
Headline
Knowledge
How Effective Coolant Management Promotes Sustainable CNC Machining
Sustainable CNC machining increasingly relies on effective coolant management to reduce environmental impact, cut costs, and improve machining performance. Coolants are essential for lubrication, heat control, and chip removal, but improper handling leads to waste and higher expenses. Proper management practices—such as regular monitoring, filtration, recycling, automation, and using eco-friendly coolants—help extend coolant life, maintain machine health, and ensure consistent product quality. Although initial investment may be a barrier, the long-term benefits include cost savings, reduced waste, and enhanced operational efficiency. Future advancements in IoT and AI are expected to further optimize coolant systems, reinforcing sustainability in CNC machining.
Headline
Knowledge
A Complete Guide to Selecting the Ideal Paper Cups for Hot Beverages
This guide provides a detailed overview of how to choose the best paper cups for hot beverages. It explores the different types of cups—single-wall, double-wall, insulated, and eco-friendly—and explains their unique features and ideal use cases. Key factors to consider include beverage temperature, insulation needs, cup size and lid compatibility, environmental impact, and safety standards. The article also outlines best practices for both consumers and businesses to ensure safe use and responsible disposal. Ultimately, selecting the right paper cup depends on balancing functionality, comfort, sustainability, and cost.
Headline
Knowledge
Understanding the Difference Between Reverse Osmosis and Traditional Water Filters
An in-depth comparison between reverse osmosis (RO) and traditional water filters, two widely used methods for purifying drinking water. It outlines how RO uses a semi-permeable membrane to remove dissolved salts, heavy metals, and microorganisms, making it ideal for areas with highly contaminated water. In contrast, traditional filters rely on physical and chemical filtration - often using activated carbon - to improve taste and remove larger particles. While RO systems offer superior contaminant removal, they come with higher costs and water usage. Traditional filters are more affordable and environmentally friendly but less effective against microscopic impurities. The article concludes that the best choice depends on specific water quality needs, and in some cases, combining both systems can offer the most comprehensive solution.
Agree