Common Types of Heat Treatment and Their Purpose
  1. Home
  2. Insights
  3. Knowledge
  4. Common Types of Heat Treatment and Their Purpose
Knowledge

Common Types of Heat Treatment and Their Purpose

In order to make metal workpieces have the required mechanical properties, physical properties and chemical properties, besides reasonable selection of materials and various forming processes, heat treatment processes are often essential. Heat treatment generally does not change the shape and overall chemical composition of the workpiece, but imparts or improves the performance of the workpiece by changing the microstructure inside the workpiece or changing the chemical composition on the surface of the workpiece. Its characteristic is to improve the internal quality of the workpiece, and its function is to improve the mechanical properties of the material, eliminate residual stress and improve the machinability of the metal.
Published: Dec 13, 2022
Common Types of Heat Treatment and Their Purpose

Heat treatment is to heat the metal material to a certain temperature, keep it warm for a certain period of time, and then cool it down to room temperature or lower at a certain rate, so as to improve the structure of the material and obtain a material with excellent performance. It generally refers to the treatment of metal materials, especially steel. Commonly used classification methods include normalizing, annealing, quenching, tempering and surface hardening.

The following introduces the types and purposes of eight common heat treatments:

  1. Normalizing

    2. Type:

    • Ordinary normalization
    • Two-stage normalization
    • Secondary normalization
    • Isothermal Normalization

    Purpose:

    • Eliminate the bad structure produced by processing, and normalize the steel, so as to facilitate the subsequent manufacturing process.
    • Make coarser grains finer and improve mechanical properties.

  2. Annealing

    3. Type:

    • Diffusion annealing
    • Fully annealed
    • Isothermal annealing
    • Low temperature annealing
    • Relaxation annealing
    • Spheroidizing annealing

    Purpose:

    • Diffusion and homogenization of alloy components.
    • Adjust the organization.
    • Soften to improve normal temperature workability and machinability.
    • Stress relief.
    • Carbide spheroidization to improve workability and mechanical properties.
    • Eliminate hydrogen embrittlement.

  3. Quenching

    4. Type:

    • Ordinary quenching
    • Time quenching (interrupted quenching)
    • Hemp Tempering (US)
    • Voss Temper

    Purpose:

    • Hardened, ie strengthened steel.

  4. Subzero Treatment

    5. Disadvantages of residual washer field iron:

    • Poor quenching hardness (insufficient, uneven)
    • Poor wear resistance
    • Quenching deformation is large
    • Dimensional stability becomes poor during use, or even damaged

    Purpose:

    • After quenching, the residual washer field iron is treated below 0 ℃ to transform it into moss field iron.

  5. Tempering

    6. Type:

    • Low temperature tempering
    • High temperature tempering

    Purpose:

    • Eliminate the stress of quenched Ma Tian loose iron
    • Organizational stabilization
    • Adjust mechanical properties (i.e. toughness)

  6. Induction Hardening

    7. Type:

    • High frequency induction hardening
    • Medium frequency induction hardening
    • Low frequency induction hardening

    Purpose:

    • Utilize the induction heating effect of high-frequency current, and then apply quenching hardening. Harden the surface of the steel and generate surface compressive stress, improving the fatigue resistance of the workpiece.

  7. Carburizing

    8. Type:

    • Solid carburizing
    • Liquid carburizing
    • Gas carburizing

    Purpose:

    • Improve surface hardness and wear resistance
    • Improve the fatigue resistance of the workpiece

  8. Nitriding

    9. Type:

    • Solid nitriding
    • Liquid nitriding
    • Gas nitriding
    • Ion Nitriding

    Purpose:

    • Improve surface hardness and wear resistance
    • Improve the corrosion resistance of the surface
    • Improve the heat resistance of the surface
    • Improve the fatigue resistance of the workpiece
Published by Dec 13, 2022 Source :SH SHUANG HO METAL

Further reading

Hot Topic

Knowledge
2022-09-20
Do You Know About Valves?
  • 214548
Knowledge
2022-04-25
Key Factors in Plastic Injection
  • 248126
Knowledge
2020-08-13
What Is A Milling Machine and What Are the Parts of A Milling Machine?
  • 57668
Knowledge
2020-04-13
How to Choose A Hydraulic Press and Its Production Process?
  • 254315
Knowledge
2020-03-24
What Is the Structure of the Lathes?
  • 61415

You might also be interested in ...

Headline
Knowledge
Medical Consumables: Global Guardians of Health
Medical consumables are a wide range of products used by healthcare professionals on a daily basis, typically for a single use before being disposed of. Their primary purpose is to ensure patient care, maintain hygiene, and prevent the spread of infection. These items are crucial for everything from routine checkups to complex surgical procedures.
Headline
Knowledge
Closed Suction System: Revolutionizing Respiratory Care
In critical care, airway management is a vital part of sustaining a patient's life. When patients rely on ventilators, clearing respiratory secretions becomes a crucial aspect of daily care. This seemingly simple, yet critically important, procedure has undergone significant evolution over the past few decades, progressing from early open suctioning to today's more advanced and safer Closed Suction System (CSS).
Headline
Knowledge
Understanding Plastic Materials: A Professional Analysis and Application Guide
Plastic materials, due to their diverse properties and wide range of applications, have become indispensable in modern industries and daily life. Choosing the right plastic material for different needs is crucial for optimizing product performance and achieving environmental benefits. The following is a professional review of the characteristics, applications, and pros and cons of the main plastic materials.
Headline
Knowledge
Exploring Rubber Processing Technology: Core and Challenges of Modern Manufacturing
Rubber processing is one of the most critical stages in modern manufacturing. From vehicle tires to industrial equipment seals and various consumer goods, rubber materials are everywhere. As the demand for high-quality and efficient products rises, rubber processing technologies continue to evolve. This article explores the basic knowledge of rubber processing, key technologies, and future trends.
Headline
Knowledge
Understanding the Coffee Robot: A Comprehensive Analysis
This article provides a comprehensive overview of coffee robots—automated machines that brew and serve coffee using advanced robotics and artificial intelligence. It outlines their key features, including AI-driven customization, app connectivity, 24/7 efficiency, and diverse drink options. The report also examines their growing impact on the coffee industry, highlighting benefits for both consumers and businesses such as convenience, consistency, and reduced labor costs. Case studies like CafeXbot, Artly Coffee, and Rozum Café illustrate how coffee robots are reshaping the coffee experience and driving market growth worldwide.
Headline
Knowledge
Understanding PU Foam: Properties, Types, and Industrial Uses
PU foam is no longer merely a cushioning material. It has become a core functional component across sports, medical, fashion, and lifestyle industries. By adjusting density, thickness, and surface feel, PU can meet diverse requirements for breathability, antimicrobial performance, durability, and comfort. It also aligns with brand trends toward eco-friendly formulations and recyclable material solutions.
Headline
Knowledge
Understanding Helical Filters: A Comprehensive Overview
Helical filters are essential components in radio frequency (RF) and microwave engineering, playing a key role in signal filtering and processing. Known for their compact size, high Q-factor, and broad frequency range, these filters are widely used across various industries. This report provides an in-depth look at helical filters, including their structure, operating principles, advantages, limitations, and typical applications.
Headline
Knowledge
Boost Your Device’s Performance: A Guide to Choosing the Right Power Supply
Choosing the right power supply unit (PSU) is crucial for maximizing your device's performance, ensuring stability, and prolonging the lifespan of your components. A PSU is not just a simple component that provides power; it is the heart of your system that ensures each component receives the right amount of power safely and efficiently. This report will guide you through the essential considerations and steps to select the ideal PSU for your needs.
Headline
Knowledge
How to Choose the Ideal Wood Screws for Furniture and Cabinetry
Selecting the right wood screws is essential to building strong, stable, and visually appealing furniture or cabinets. Key factors include screw size, length, thread type, head style, and compatibility with different wood materials. Coarse threads suit softwoods, while fine threads are better for hardwoods. Choosing the proper head type ensures both function and aesthetics, while accounting for environmental changes helps maintain joint integrity. Pre-drilling pilot holes can also prevent splitting, especially in dense wood. By understanding these considerations, woodworkers can achieve durable, high-quality results in their projects.
Headline
Knowledge
How Effective Coolant Management Promotes Sustainable CNC Machining
Sustainable CNC machining increasingly relies on effective coolant management to reduce environmental impact, cut costs, and improve machining performance. Coolants are essential for lubrication, heat control, and chip removal, but improper handling leads to waste and higher expenses. Proper management practices—such as regular monitoring, filtration, recycling, automation, and using eco-friendly coolants—help extend coolant life, maintain machine health, and ensure consistent product quality. Although initial investment may be a barrier, the long-term benefits include cost savings, reduced waste, and enhanced operational efficiency. Future advancements in IoT and AI are expected to further optimize coolant systems, reinforcing sustainability in CNC machining.
Headline
Knowledge
A Complete Guide to Selecting the Ideal Paper Cups for Hot Beverages
This guide provides a detailed overview of how to choose the best paper cups for hot beverages. It explores the different types of cups—single-wall, double-wall, insulated, and eco-friendly—and explains their unique features and ideal use cases. Key factors to consider include beverage temperature, insulation needs, cup size and lid compatibility, environmental impact, and safety standards. The article also outlines best practices for both consumers and businesses to ensure safe use and responsible disposal. Ultimately, selecting the right paper cup depends on balancing functionality, comfort, sustainability, and cost.
Headline
Knowledge
Understanding the Difference Between Reverse Osmosis and Traditional Water Filters
An in-depth comparison between reverse osmosis (RO) and traditional water filters, two widely used methods for purifying drinking water. It outlines how RO uses a semi-permeable membrane to remove dissolved salts, heavy metals, and microorganisms, making it ideal for areas with highly contaminated water. In contrast, traditional filters rely on physical and chemical filtration - often using activated carbon - to improve taste and remove larger particles. While RO systems offer superior contaminant removal, they come with higher costs and water usage. Traditional filters are more affordable and environmentally friendly but less effective against microscopic impurities. The article concludes that the best choice depends on specific water quality needs, and in some cases, combining both systems can offer the most comprehensive solution.
Clear
Apply
Agree