The Three Key Enterprise Applications of Edge Computing Are Closely Related to Cloud, Industrial Internet of Things, and 5G
Knowledge

The Three Key Enterprise Applications of Edge Computing Are Closely Related to Cloud, Industrial Internet of Things, and 5G

Edge Computing is a distributed network architecture that allows data to be processed and analyzed closer to its source, moving resources such as computing, storage, and network bandwidth as close to users (or endpoints) as possible. Industrial Internet of Things (IIoT), artificial intelligence, big data analysis to 5G networks, edge computing can be said to be the expansion and extension of IT environments and computing technologies that seek common ground in differences.
Published: Aug 15, 2022
The Three Key Enterprise Applications of Edge Computing Are Closely Related to Cloud, Industrial Internet of Things, and 5G

From cloud computing, Industrial Internet of Things (IIoT), artificial intelligence, big data analysis to 5G networks, edge computing can be said to be the expansion and extension of IT environments and computing technologies that seek common ground in differences. In 2020, as the COVID-19 pandemic has changed the world, and emerging ecosystems have emerged, edge computing is entering a critical transition phase, becoming a “new” imperative for an enterprise’s overall strategy.

Edge Computing is a distributed network architecture that allows data to be processed and analyzed closer to its source, moving resources such as computing, storage, and network bandwidth as close to users (or endpoints) as possible to alleviate bandwidth constraints and reduce data errors and transmission delays.

According to the latest research by Frost & Sullivan, industrial enterprises are turning to edge computing to save network bandwidth, promote operational security, improve data transmission efficiency and reduce organizational costs. Edge computing is expected to become a "basic technology”, which will be adopted by up to 90% of industrial enterprises in 2022. The Multi-access Edge Computing (MEC) market is expected to reach a compound annual growth rate of 157.4%, with annual revenue increasing from $64.1 million in 2019 to $7.23 billion in 2024.

At present, as the network connects the industrial environment more closely, edge computing will become an important hub, managing enterprise automation equipment and remote capital equipment monitoring, and processing equipment (stranded assets), automated robots, and self-driving cars. and data access and traffic management in smart factories, helping large enterprises and telecom service providers to build Industrial Internet of Things (IIoT) to deploy enterprise-specific wireless networks to accelerate Industry 4.0, automated mining, precision agriculture, smart healthcare, The development of emerging technologies such as smart retail.

Frost & Sullivan analysts further pointed out that the combination of the newly launched 5G technology and multi-access edge computing will create more opportunities for telecom service providers to innovate products and expand business opportunities. Cooperate with capable cloud service providers to design solutions for technologies such as AR/VR, robotics, self-driving cars, and drone delivery. Under the public cloud architecture, provide enterprise users with 5G-based end-to-end services, and edge computing is also a consumer an important bridge between consumers and service providers. There are three mainstream applications of edge computing at this stage:

Cloud Computing and Edge Computing Are Inside and Outside of Each Other and Complement Each Other

Cloud computing provides enterprises with computing, storage and network services. In a hybrid cloud architecture, edge computing is the intermediary between devices, clouds or data centers. It is mainly used to access device data and provide instant analysis as a transmission pipeline between the data source and the cloud to reduce round trips. Delays that may occur in data centers and various clouds. Since the edge can process and filter the data that needs to be sent to the cloud, it can also reduce bandwidth costs. The local processing characteristics of edge computing help enterprises gain local data and dominance.

In the future technical environment, edge computing can be regarded as an extension of the cloud architecture. In the hybrid structure, the functions of traditional cloud computing and edge computing can be combined, and both parties can make up for their respective weaknesses. Taking autonomous driving as an example, the reason why humans cannot fully rely on self-driving systems is that the systems must make lightning-fast and 100% accurate decisions. If a child suddenly rushes into the street, there should be no delay before the system sends the command to brake the car.

Among them, cloud computing needs to be connected back to the centralized data center, and it takes more time to process data at the other end. Conversely, the characteristic of edge computing is to process data at the "edge" of the network, saving the time of connecting to a "distant" data center, not only avoiding unnecessary communication and storage costs, but also applying machine learning and AI to identify Business-impacting data patterns that shorten response delays to reduce the risk of car crashes.

For retail, medical and other industries where IoT is relatively mature, edge computing can help reduce latency. Taking the retail industry facing the post-pandemic era as an example, making full use of edge computing in operational processes such as automated checkout, product tracking, sensor tracking and supply chain reporting will improve the consumer experience. In healthcare, edge networks collect data from wearable devices to understand treatment methods, support remote diagnosis, monitor patients, and help maintain patient health.

The General Trend of IT and OT Integration, Edge Computing Has Become A Common Language

Edge computing can be said to be one of the cores of the Industrial Internet of Things (IIoT), and it is also an important key for enterprises to accelerate their journey to Industry 4.0. Taking factory equipment management as an example, using edge computing as a gateway to multiple devices, it must track, monitor and manage all connected fleets of devices to ensure that IoT devices are indeed functioning securely in configuration and deployment, the edge It must provide secure access to docked devices, monitor operational health, detect and remotely troubleshoot, and even manage software, patch updates and hardware maintenance. From device deployment to decommissioning, each device will undergo lifecycle management through edge computing device management services.

In the past, information technology (IT) and operational technology (OT) belonged to two different disciplines with their own management goals. As cloud-based IoT deployments become more and more massive, IIoT devices and connected machines have become network virus intrusion points with the new target of malicious attacks, the need for integrated management of IT and OT is gradually derived, and edge computing has become a common language between the two. individual burdens of the personnel. At this stage, industrial companies including manufacturing, transportation, oil and gas, and smart buildings will rely on edge computing platforms to realize the next generation of automated smart production.

5G + Edge Computing Join Forces to Create A Delay-Free Audio And Video Entertainment Experience

5G networks are transforming the manufacturing, healthcare, retail and automotive industries. The infrastructure running on telecom provider facilities connected via 5G networks has low latency. Telecom providers are moving towards a multi-tenant, managed infrastructure layer that bridges the gap between cloud and end users. Public cloud providers including Amazon, Google, IBM and Microsoft are actively partnering with telcos to instead bring some managed services to 5G-based edge locations.

In recent years, cloud computing has been integrated into almost everyone's life. We place an order for shopping from an app on a smartphone, and receive the item a few hours later at the specified time and address. We use Netflix to watch series and movies on our phones and Spotify to listen to music almost anywhere in the world.

Next, 5G and multi-access edge computing will affect the technological innovation progress of enterprises and consumers in the next few years, especially 5G applications such as games and AR/VR/UHD streaming media for the vast consumer market. What is expected is an audio-visual entertainment experience with richer sound and light effects and no delay.

Published by Aug 15, 2022 Source :Future Commerce

Further reading

You might also be interested in ...

Headline
Knowledge
Medical Consumables: Global Guardians of Health
Medical consumables are a wide range of products used by healthcare professionals on a daily basis, typically for a single use before being disposed of. Their primary purpose is to ensure patient care, maintain hygiene, and prevent the spread of infection. These items are crucial for everything from routine checkups to complex surgical procedures.
Headline
Knowledge
Closed Suction System: Revolutionizing Respiratory Care
In critical care, airway management is a vital part of sustaining a patient's life. When patients rely on ventilators, clearing respiratory secretions becomes a crucial aspect of daily care. This seemingly simple, yet critically important, procedure has undergone significant evolution over the past few decades, progressing from early open suctioning to today's more advanced and safer Closed Suction System (CSS).
Headline
Knowledge
Understanding Plastic Materials: A Professional Analysis and Application Guide
Plastic materials, due to their diverse properties and wide range of applications, have become indispensable in modern industries and daily life. Choosing the right plastic material for different needs is crucial for optimizing product performance and achieving environmental benefits. The following is a professional review of the characteristics, applications, and pros and cons of the main plastic materials.
Headline
Knowledge
Exploring Rubber Processing Technology: Core and Challenges of Modern Manufacturing
Rubber processing is one of the most critical stages in modern manufacturing. From vehicle tires to industrial equipment seals and various consumer goods, rubber materials are everywhere. As the demand for high-quality and efficient products rises, rubber processing technologies continue to evolve. This article explores the basic knowledge of rubber processing, key technologies, and future trends.
Headline
Knowledge
Understanding the Coffee Robot: A Comprehensive Analysis
This article provides a comprehensive overview of coffee robots—automated machines that brew and serve coffee using advanced robotics and artificial intelligence. It outlines their key features, including AI-driven customization, app connectivity, 24/7 efficiency, and diverse drink options. The report also examines their growing impact on the coffee industry, highlighting benefits for both consumers and businesses such as convenience, consistency, and reduced labor costs. Case studies like CafeXbot, Artly Coffee, and Rozum Café illustrate how coffee robots are reshaping the coffee experience and driving market growth worldwide.
Headline
Knowledge
Understanding PU Foam: Properties, Types, and Industrial Uses
PU foam is no longer merely a cushioning material. It has become a core functional component across sports, medical, fashion, and lifestyle industries. By adjusting density, thickness, and surface feel, PU can meet diverse requirements for breathability, antimicrobial performance, durability, and comfort. It also aligns with brand trends toward eco-friendly formulations and recyclable material solutions.
Headline
Knowledge
Understanding Helical Filters: A Comprehensive Overview
Helical filters are essential components in radio frequency (RF) and microwave engineering, playing a key role in signal filtering and processing. Known for their compact size, high Q-factor, and broad frequency range, these filters are widely used across various industries. This report provides an in-depth look at helical filters, including their structure, operating principles, advantages, limitations, and typical applications.
Headline
Knowledge
Boost Your Device’s Performance: A Guide to Choosing the Right Power Supply
Choosing the right power supply unit (PSU) is crucial for maximizing your device's performance, ensuring stability, and prolonging the lifespan of your components. A PSU is not just a simple component that provides power; it is the heart of your system that ensures each component receives the right amount of power safely and efficiently. This report will guide you through the essential considerations and steps to select the ideal PSU for your needs.
Headline
Knowledge
How to Choose the Ideal Wood Screws for Furniture and Cabinetry
Selecting the right wood screws is essential to building strong, stable, and visually appealing furniture or cabinets. Key factors include screw size, length, thread type, head style, and compatibility with different wood materials. Coarse threads suit softwoods, while fine threads are better for hardwoods. Choosing the proper head type ensures both function and aesthetics, while accounting for environmental changes helps maintain joint integrity. Pre-drilling pilot holes can also prevent splitting, especially in dense wood. By understanding these considerations, woodworkers can achieve durable, high-quality results in their projects.
Headline
Knowledge
How Effective Coolant Management Promotes Sustainable CNC Machining
Sustainable CNC machining increasingly relies on effective coolant management to reduce environmental impact, cut costs, and improve machining performance. Coolants are essential for lubrication, heat control, and chip removal, but improper handling leads to waste and higher expenses. Proper management practices—such as regular monitoring, filtration, recycling, automation, and using eco-friendly coolants—help extend coolant life, maintain machine health, and ensure consistent product quality. Although initial investment may be a barrier, the long-term benefits include cost savings, reduced waste, and enhanced operational efficiency. Future advancements in IoT and AI are expected to further optimize coolant systems, reinforcing sustainability in CNC machining.
Headline
Knowledge
A Complete Guide to Selecting the Ideal Paper Cups for Hot Beverages
This guide provides a detailed overview of how to choose the best paper cups for hot beverages. It explores the different types of cups—single-wall, double-wall, insulated, and eco-friendly—and explains their unique features and ideal use cases. Key factors to consider include beverage temperature, insulation needs, cup size and lid compatibility, environmental impact, and safety standards. The article also outlines best practices for both consumers and businesses to ensure safe use and responsible disposal. Ultimately, selecting the right paper cup depends on balancing functionality, comfort, sustainability, and cost.
Headline
Knowledge
Understanding the Difference Between Reverse Osmosis and Traditional Water Filters
An in-depth comparison between reverse osmosis (RO) and traditional water filters, two widely used methods for purifying drinking water. It outlines how RO uses a semi-permeable membrane to remove dissolved salts, heavy metals, and microorganisms, making it ideal for areas with highly contaminated water. In contrast, traditional filters rely on physical and chemical filtration - often using activated carbon - to improve taste and remove larger particles. While RO systems offer superior contaminant removal, they come with higher costs and water usage. Traditional filters are more affordable and environmentally friendly but less effective against microscopic impurities. The article concludes that the best choice depends on specific water quality needs, and in some cases, combining both systems can offer the most comprehensive solution.
Agree