What does a Vulcanizer do?
  1. Home
  2. Insights
  3. Knowledge
  4. What does a Vulcanizer do?
Knowledge

What does a Vulcanizer do?

The rubber vulcanizer is the most widely used instrument in the rubber processing industry to control the quality of rubber materials, rapid inspection, and basic research on rubber. and parameters such as maximum and minimum torque.
Published: Aug 30, 2022
What does a Vulcanizer do?

What does a Vulcanizer do?

A vulcanizer is a machine for vulcanizing various rubber and plastic products. It has the functions of timing mold clamping, automatic pressure supplementation, automatic temperature control, automatic timing, and alarm when it arrives. It is divided into three forms: electric heating, steam heating, and heat transfer oil heating.

The main function of the vulcanizer is to provide the pressure and temperature required for vulcanization. The pressure is generated by the hydraulic system through the hydraulic cylinder, and the temperature is provided by the heating medium (usually steam, heat transfer oil, etc.). Flat belt vulcanizers can be divided into column type flat belt vulcanizers and frame flat belt vulcanizers according to the frame structure. According to the number of working layers, it can be divided into single layers and multi-layer. The working medium of the hydraulic system can be divided into oil pressure and water pressure.

Working Principle of Vulcanizer:

Rubber belt vulcanization is a whole process from raw rubber to mature rubber. During this whole process, the rubber vulcanizer must provide working pressure, temperature, and time to control the vulcanized rubber. The vulcanizing machine satisfies this whole process, the sound card rack and the pressure plate produce the working pressure, and the electrical control cabinet and the heating plate produce the temperature and control the rubber vulcanization time. Domestic general rubber strip vulcanization temperature is 145 degrees, vulcanized rubber working pressure does not exceed 1.5mpa, and vulcanization time varies from 30 to 60 minutes depending on the tape.

The Performance of the Vulcanizer:

  • PLC, HMI control, can complete manual and automatic control systems. The automatic control system can complete the functions of mold clamping, exhaust pipe, temperature control, vulcanized rubber timing, alarm, mold ejection, etc. The touch screen displays the temperature of each heating area of the information heating plate in real-time.
  • The hydraulic cylinder is made of ZG270-500 raw materials, and the plunger pump is made of cold hard aluminum alloy pig iron with high material density, which is finely cast after casting. The sealing method of the hydraulic cylinder is a YX-type sealing ring.
  • The automatic top iron of the hydraulic press is used for the pot side of the heating plate. Under the function of four hydraulic cylinders, the cushions on both sides of the heating plate will win or lose. Anti-block overlap equipment is set up on both sides of the heating plate.
  • Each heating area of the heating plate is set up with a set of valves for adjusting the temperature. Under the control of the PLC, it is ensured that the temperature of each heating area of the heating plate is uniform and consistent.
  • Hydraulic system: Applied to various hydraulic systems, under the control of PLC, it can complete fully automatic: mold clamping, exhaust, mold opening, and unloading.
  • Synchronized and balanced organization of mechanical equipment: There is a synchronous shaft surrounding the generator set directly below the service platform, and racks are set up on both sides of the shaft to ensure that the service platform is leveled.
  • Clamping-oriented equipment: Set up clamping-oriented equipment on both sides of the lower bed, and install oriented seats on the frame plate and service platform. The oriented seats produce and process slopes, and the slope spacing can be adjusted according to the top wire.
  • Boosting organization for mold ejection: The four oil cylinders built under the service platform act during mold ejection, and the platform is forcibly pulled away to avoid the phenomenon of sticking to the pot and being unable to open the mold.

The Use and Application of Vulcanizer:

The vulcanizing machine is suitable for vulcanized rubber of various plastic products. It is necessary for plastics, vulcanized rubber guns and various thermosetting raw materials. The equipment is widely used and can be used in the metallurgical industry, Transport joints for adhesive belt conveyors in the chemical industry, power stations, etc.

Precautions for the Use of Vulcanizers:

The vulcanizer is mechanical equipment suitable for the vulcanization and pressing of various rubber and plastic products. It plays an important role in the rubber industry. The vulcanizer has complete functions and is relatively safe to operate. It reduces labor intensity and improves production efficiency.

When the vulcanizer is idle, it should be placed in a dry and ventilated environment. Not only that but also in a dry and ventilated environment when using the vulcanizer. Avoid placing it in a humid environment, because in a humid environment The environment will affect the normal operation of the vulcanizer, thereby affecting the quality of the produced products. In addition, before using the vulcanizer, you must read its instructions carefully, and operate step by step according to the requirements to ensure the standardization of the operation.

Published by Aug 30, 2022 Source :szksma

Further reading

Hot Topic

Knowledge
2022-09-20
Do You Know About Valves?
  • 214374
Knowledge
2022-04-25
Key Factors in Plastic Injection
  • 247906
Knowledge
2020-08-13
What Is A Milling Machine and What Are the Parts of A Milling Machine?
  • 57556
Knowledge
2020-04-13
How to Choose A Hydraulic Press and Its Production Process?
  • 254089
Knowledge
2020-03-24
What Is the Structure of the Lathes?
  • 61329

You might also be interested in ...

Headline
Knowledge
Medical Consumables: Global Guardians of Health
Medical consumables are a wide range of products used by healthcare professionals on a daily basis, typically for a single use before being disposed of. Their primary purpose is to ensure patient care, maintain hygiene, and prevent the spread of infection. These items are crucial for everything from routine checkups to complex surgical procedures.
Headline
Knowledge
Closed Suction System: Revolutionizing Respiratory Care
In critical care, airway management is a vital part of sustaining a patient's life. When patients rely on ventilators, clearing respiratory secretions becomes a crucial aspect of daily care. This seemingly simple, yet critically important, procedure has undergone significant evolution over the past few decades, progressing from early open suctioning to today's more advanced and safer Closed Suction System (CSS).
Headline
Knowledge
Understanding Plastic Materials: A Professional Analysis and Application Guide
Plastic materials, due to their diverse properties and wide range of applications, have become indispensable in modern industries and daily life. Choosing the right plastic material for different needs is crucial for optimizing product performance and achieving environmental benefits. The following is a professional review of the characteristics, applications, and pros and cons of the main plastic materials.
Headline
Knowledge
Exploring Rubber Processing Technology: Core and Challenges of Modern Manufacturing
Rubber processing is one of the most critical stages in modern manufacturing. From vehicle tires to industrial equipment seals and various consumer goods, rubber materials are everywhere. As the demand for high-quality and efficient products rises, rubber processing technologies continue to evolve. This article explores the basic knowledge of rubber processing, key technologies, and future trends.
Headline
Knowledge
Understanding the Coffee Robot: A Comprehensive Analysis
This article provides a comprehensive overview of coffee robots—automated machines that brew and serve coffee using advanced robotics and artificial intelligence. It outlines their key features, including AI-driven customization, app connectivity, 24/7 efficiency, and diverse drink options. The report also examines their growing impact on the coffee industry, highlighting benefits for both consumers and businesses such as convenience, consistency, and reduced labor costs. Case studies like CafeXbot, Artly Coffee, and Rozum Café illustrate how coffee robots are reshaping the coffee experience and driving market growth worldwide.
Headline
Knowledge
Understanding PU Foam: Properties, Types, and Industrial Uses
PU foam is no longer merely a cushioning material. It has become a core functional component across sports, medical, fashion, and lifestyle industries. By adjusting density, thickness, and surface feel, PU can meet diverse requirements for breathability, antimicrobial performance, durability, and comfort. It also aligns with brand trends toward eco-friendly formulations and recyclable material solutions.
Headline
Knowledge
Understanding Helical Filters: A Comprehensive Overview
Helical filters are essential components in radio frequency (RF) and microwave engineering, playing a key role in signal filtering and processing. Known for their compact size, high Q-factor, and broad frequency range, these filters are widely used across various industries. This report provides an in-depth look at helical filters, including their structure, operating principles, advantages, limitations, and typical applications.
Headline
Knowledge
Boost Your Device’s Performance: A Guide to Choosing the Right Power Supply
Choosing the right power supply unit (PSU) is crucial for maximizing your device's performance, ensuring stability, and prolonging the lifespan of your components. A PSU is not just a simple component that provides power; it is the heart of your system that ensures each component receives the right amount of power safely and efficiently. This report will guide you through the essential considerations and steps to select the ideal PSU for your needs.
Headline
Knowledge
How to Choose the Ideal Wood Screws for Furniture and Cabinetry
Selecting the right wood screws is essential to building strong, stable, and visually appealing furniture or cabinets. Key factors include screw size, length, thread type, head style, and compatibility with different wood materials. Coarse threads suit softwoods, while fine threads are better for hardwoods. Choosing the proper head type ensures both function and aesthetics, while accounting for environmental changes helps maintain joint integrity. Pre-drilling pilot holes can also prevent splitting, especially in dense wood. By understanding these considerations, woodworkers can achieve durable, high-quality results in their projects.
Headline
Knowledge
How Effective Coolant Management Promotes Sustainable CNC Machining
Sustainable CNC machining increasingly relies on effective coolant management to reduce environmental impact, cut costs, and improve machining performance. Coolants are essential for lubrication, heat control, and chip removal, but improper handling leads to waste and higher expenses. Proper management practices—such as regular monitoring, filtration, recycling, automation, and using eco-friendly coolants—help extend coolant life, maintain machine health, and ensure consistent product quality. Although initial investment may be a barrier, the long-term benefits include cost savings, reduced waste, and enhanced operational efficiency. Future advancements in IoT and AI are expected to further optimize coolant systems, reinforcing sustainability in CNC machining.
Headline
Knowledge
A Complete Guide to Selecting the Ideal Paper Cups for Hot Beverages
This guide provides a detailed overview of how to choose the best paper cups for hot beverages. It explores the different types of cups—single-wall, double-wall, insulated, and eco-friendly—and explains their unique features and ideal use cases. Key factors to consider include beverage temperature, insulation needs, cup size and lid compatibility, environmental impact, and safety standards. The article also outlines best practices for both consumers and businesses to ensure safe use and responsible disposal. Ultimately, selecting the right paper cup depends on balancing functionality, comfort, sustainability, and cost.
Headline
Knowledge
Understanding the Difference Between Reverse Osmosis and Traditional Water Filters
An in-depth comparison between reverse osmosis (RO) and traditional water filters, two widely used methods for purifying drinking water. It outlines how RO uses a semi-permeable membrane to remove dissolved salts, heavy metals, and microorganisms, making it ideal for areas with highly contaminated water. In contrast, traditional filters rely on physical and chemical filtration - often using activated carbon - to improve taste and remove larger particles. While RO systems offer superior contaminant removal, they come with higher costs and water usage. Traditional filters are more affordable and environmentally friendly but less effective against microscopic impurities. The article concludes that the best choice depends on specific water quality needs, and in some cases, combining both systems can offer the most comprehensive solution.
Clear
Apply
Agree