What is Laser Cutting?
Knowledge

What is Laser Cutting?

Cutting technology has many different processing techniques, and laser cutting can perform more complex and precise cutting requirements, which is also a common processing technique in industrial manufacturing.
Published: Mar 23, 2020
What is Laser Cutting?

What is laser cutting?

Laser cutting is a technique that uses lasers to cut materials.

It is often used in industrial manufacturing. Laser cutting works by directing the output of a high-power laser through optics to focus the resulting laser beam. The cutting process is melted by aligning its materials. The laser cutting technology can have a high-quality surface finish the cutting edge, which is used in industrial production, cutting flat materials and pipe materials. Compared with the traditional cutting process, the laser cutting technology can make the laser cutting more precise, the slit width is smaller, and the heat-affected zone is smaller, and the relatively complicated shape or the small hole cutting can be performed.

Laser processing

Laser cutting is a thermal separation method that cuts many different materials efficiently, quickly and accurately. A laser is everything. After the laser processing is completed, the finished workpiece can be removed immediately without reworking. If the laser illuminates the material at low power, only one layer is removed (and thus etched). If you increase the power, the laser beam will penetrate the material. The laser can cut a wide variety of materials such as acrylic, wood, laminate, film, signage, paper and more.

There are some different methods of cutting using lasers, with different types used to cut different materials. Some of the methods are vaporization, melt and blow, melt blow and burn, thermal stress cracking, scribing, cold cutting and burning stabilized laser cutting.

Published by Mar 23, 2020 Source :esabna, wikipedia

Further reading

You might also be interested in ...

Headline
Knowledge
What are the Applications of Laser Engraving? 12 Major Applications and Uses
Cutting technology has many different processing techniques, and laser cutting can perform more complex and precise cutting requirements, which is also a common processing technique in industrial manufacturing.
Headline
Knowledge
Do You Know About Valves?
Valve is an important adjustment device in the fluid transportation system, which can basically control the on-off, flow and flow direction of the fluid. There are many types and specifications of valves, and the valves used for different work requirements are also different. The working principles, advantages and disadvantages of 5 common types of valves are described below.
Headline
Knowledge
What is A Cloud Service? A Complete Introduction to The Three Application Types of Public Cloud, Private Cloud and Hybrid Cloud
The word "cloud" has been the focus of the development of network technology in recent years. With the operating environment provided by the remote server, users can access data anytime and anywhere. It has become a mainstream trend to build an enterprise's operating system through cloud services, but are cloud services really safe? This article will fully introduce the modules and modes of cloud services, and through case sharing, will show you the many benefits of cloud services to enterprises.
Headline
Knowledge
What are the Differences between Lathe, Milling, Drilling, Grinder, Boring, Planer, Punch?
Machine tool is based on the definition made by the International Standards Organization (ISO) and the American Machine Tool Fair (IMTS): "A device that is driven by power and cannot be carried by manpower. The combination of chemical or other methods to achieve the purpose of processing materials can be defined as a machine tool.” According to the different types of processing, the machine tool is divided into dozens of types, what are the differences among them?
Headline
Knowledge
What is Biofuel?
Interest in biofuels is growing due to their environmental benefits and potential greenhouse gas reduction potential.
Headline
Knowledge
Introduction to the Basic Principles of Hydraulics
The function of the hydraulic transmission system is to transmit power and motion, and the hydraulic control system must make the output of the hydraulic system meet specific performance requirements.
Headline
Knowledge
3 Minutes to Understand What Machine Learning Is
What the really is artificial intelligence doing now? Artificial intelligence, machine learning, and deep learning can't tell the difference? Don't worry, we would analyze the differences in an easy-to-understand way. The following will solve the doubts!
Headline
Knowledge
What is Hyperautomation?
Hyperautomation is the use of the power of multiple technologies to achieve end-to-end automation. Hyperautomation is the process of continuously integrating automation into an organization's business processes, combining advanced technologies such as robotic process automation (RPA), artificial intelligence, and machine learning to enhance the results of human work. Not only does it automate key processes, but it also builds an automation ecosystem that finds more processes that can be automated without human intervention.
Headline
Knowledge
What is the Valve and its Type and Function?
The commonly used control items on industrial pipelines and equipment mainly refer to some commonly used valves, which are used to control the flow of the medium in the pipeline.
Headline
Knowledge
Classification of Internal High Pressure Forming Hydraulic Presses
Internal high-pressure forming technology is one of the lightweight forming technologies for auto parts, which relies on the liquid or gas as the transmission medium, uses the precise control of internal pressure, and the axial feeding, with the mold cavity, and finally makes the metal hollow blank form the integral complex variable section member. Internal high pressure forming equipment is suitable for manufacturing aerospace, nuclear power, petrochemical, drinking water system, pipe system, automotive and bicycle industries of complex shaped section hollow components.
Headline
Knowledge
What are the Spindle Motor and its Working Principle and Structure?
The mechanical structure of the main drive system of the CNC machine tool has been greatly simplified, and the belt drive and gear drive have been canceled. Zero drive of the machine.
Headline
Knowledge
What is 3D Scanning Technology? What Technology Categories and Applications are there?
With the rapid advancement of science and technology, 3D scan technology has also developed. Through the light source, light with a special structure is projected onto the surface of the object, and digital information is obtained through computer calculation. The versatile 3D scan technology is gaining popularity.
Agree