Overview of Aerosolized Medication Nebulization and Oxygen Humidification Applications
Knowledge

Overview of Aerosolized Medication Nebulization and Oxygen Humidification Applications

For patients with hypoxemia, dyspnea, or pneumonia, simple oxygen therapy alone may not effectively alleviate inflammatory responses or breathing difficulties. Combining aerosolized medication nebulization with oxygen humidification can promote pulmonary ventilation, improve secretion clearance, and relieve symptoms. This strategy is widely applied in chronic obstructive pulmonary disease (COPD), long-term oxygen therapy patients, postoperative care, acute and chronic respiratory infections, and post-COVID-19 rehabilitation stages. It achieves synergistic effects of oxygen supplementation combined with bronchodilators or saline nebulization, enhancing overall respiratory function and patient comfort.
Published: Aug 07, 2025
Overview of Aerosolized Medication Nebulization and Oxygen Humidification Applications

Precise Oxygen Delivery

  • Softip Nasal Cannula Series
  • Made of soft, medical-grade PVC compliant with ISO 10993 biocompatibility standards, designed in multiple sizes for adults, children, and infants. Features a Star-lumen five-channel structure to provide stable oxygen flow, reducing pressure and friction on the nostrils.

  • Oxygen Mask / Fixed Venturi Mask
  • These masks provide high FiO₂ delivery capability. Equipped with a Venturi pressure-reducing and mixing ring, they ensure oxygen concentration stability even at varying respiratory rates. Suitable for patients requiring high-concentration oxygen therapy.

  • Tracheostomy Oxygen Mask
  • Specifically designed for intubated or tracheostomy patients, allowing smooth oxygen or aerosol medication delivery. Compatible with common tracheostomy tubes and filter connectors.

  • High Flow Nasal Cannula System (HFNC)
  • Delivers up to 60 L/min of oxygen/air mixture with heating and humidification functions. Effectively reduces respiratory workload, restores positive airway pressure, and benefits patients post-extubation or with chronic obstructive pulmonary disease.

    Respiratory Humidification Devices

  • Bubble Humidifier (BH-1 / BH-2 Series)
  • When oxygen flow exceeds 4 L/min, humidification is necessary to prevent nasal mucosa dryness and ulceration. This bubble humidifier vaporizes oxygen through cold water to provide adequate moisture and comfort. The container capacity is 400 ml, equipped with safety valves (2 / 4 / 6 PSI) to prevent overpressure.

    Nebulization Devices: Oxygen Medication Dual-Purpose and Small-Volume Nebulizers

  • Large Volume Nebulizer
  • Meets the needs of long-term oxygen therapy combined with aerosol medication. Features a Venturi-type oxygen mixing ring to adjust oxygen concentration between 35–100% (at 10 L/min oxygen flow, nebulization rate approx. 60 ml/h). Supports insertion of a heating element to warm the aerosol, protecting mucosa.

  • Small-Volume Nebulizer (SVN, Neb.Easy Series)
  • Suitable for daily or acute aerosol medication therapy, producing particles around 3.8 µm in size. Utilizes ultra-quiet nebulization technology, can be used vertically or in a reclined position. Materials are latex- and DEHP-free, reducing allergy risk and exposure to plasticizers.

    Conclusion

    Choosing appropriate oxygen and nebulization therapy interfaces and nebulizer systems is a strategy balancing short-term therapeutic efficacy with long-term respiratory comfort. These devices feature integrated oxygen-aerosol delivery, precise control, ease of operation, and sterilizable safe materials, making them suitable for hospitals, long-term care facilities, and home healthcare settings.

    Before use, it is recommended to understand the patient’s respiratory function, airway occupancy ratio, and treatment goals, then integrate nasal cannulas, masks, humidifiers, and nebulizers accordingly to provide customized and traceable respiratory therapy workflows.

    Published by Aug 07, 2025 galemed.

    Further reading

    You might also be interested in ...

    Headline
    Knowledge
    What Is a CNC Machine Tool? Unveiling the Secret Behind Modern Factories’ High Efficiency
    CNC (Computer Numerical Control) machine tools are automated devices that control machining processes through computer programming. Known for their high efficiency, precision, and stability, they are widely used across industries such as aerospace, automotive, mold making, electronics, medical, and energy. With the rise of Industry 4.0 and smart manufacturing, CNC technology continues to evolve toward multi-axis machining, intelligent control, remote monitoring, and integrated processes. This widespread adoption not only enhances manufacturing performance but also reshapes the workforce, shifting traditional manual skills toward digital operation and system integration—bringing greater production flexibility and competitiveness to businesses.
    Headline
    Knowledge
    The Resistor's Role in Modern Manufacturing
    A resistor is a fundamental and indispensable component in electronic circuits. Its physical design is not arbitrary; rather, it is closely linked to its function, power requirements, and manufacturing method. Every detail, from its size and material to its structure, reveals its intended application. Understanding a resistor's form is like reading its "user manual," helping us to apply it more precisely.
    Headline
    Knowledge
    The Manufacturing Process of Construction Screws: An Overview
    The manufacturing of construction screws involves multiple carefully controlled steps to ensure high quality and durability. It begins with selecting suitable raw materials, usually low-carbon steel wire, followed by cold heading to form the screw head. Threads are then created through thread rolling, which preserves the metal’s strength better than cutting. Heat treatment enhances hardness and toughness, while surface coatings protect against corrosion. Rigorous quality control is maintained throughout the process, and finally, the screws are packaged for safe transportation. Each stage is crucial to producing reliable screws capable of withstanding tough conditions in construction and industrial use.
    Headline
    Knowledge
    The Transformation and Innovation of Flexible Magnetic Materials in Educational Applications
    In today's era where digital education and maker learning are prevalent, the design of teaching tools is no longer limited to static displays but is moving toward interactivity, modularity, and creative expansion. Flexible magnetic materials—especially flexible magnets that can be cut, printed, and adhered—are gradually becoming indispensable media in the new generation of educational settings. These materials can be flexibly applied to puzzle teaching aids, display boards, and modular signage systems. Moreover, due to their ease of processing and cost-effectiveness, they widely support hands-on practice and creative activities in STEAM education (Science, Technology, Engineering, Arts, and Mathematics).
    Headline
    Knowledge
    Advanced Solutions for Microplastic Pollution: The Critical Role of Reverse Osmosis Filtration
    Microplastics - tiny plastic particles under five millimeters - are a growing environmental and health concern due to their widespread presence in water, food, and air. Conventional water treatment struggles to remove them effectively, but reverse osmosis (RO) filtration offers a highly efficient solution by using ultra-fine membranes that block over 99% of microplastics through physical filtration, electrostatic repulsion, and high-pressure forcing. Despite requiring regular maintenance and higher upfront costs, RO systems provide reliable long-term removal of microplastics and other contaminants, making them essential for ensuring clean drinking water and protecting public health from microplastic pollution.
    Headline
    Knowledge
    Understanding KVM & AV Integration: Fundamentals & Applications
    As smart building, IoT, and cloud technologies advance rapidly, the demand for remote control and multi‑device integrated management across industries has surged. Any environment with multiple integrated devices needs a stable, secure, and efficient system that allows centralized monitoring and control—ensuring real‑time transmission of information and video. However, traditional single-point management struggles with large-scale, geographically dispersed deployments. In this context, KVM technology combined with AV integration solutions has emerged as a critical tool in the smart era.
    Headline
    Knowledge
    Textile Fiber Deep Dive: A Comprehensive Guide from Classics to Innovations
    Every textile product tells a story about its fibers. Its appearance, feel, and performance are all intricately linked to the textile fibers that make it up. Understanding the physical properties (e.g., strength, elasticity) and chemical properties (e.g., moisture absorption, heat resistance) of fibers is key to grasping the core value of a textile product. This article aims to systematically dissect the secrets of natural, man-made, and innovative fibers, building a comprehensive knowledge system for readers.
    Headline
    Knowledge
    The Importance of Plastic Washing in the Pelletizing Process
    Plastic recycling has become a critical part of the circular economy, with recycling processes ensuring that plastics are repurposed for new products. However, before the pellets can be created, plastics must undergo thorough cleaning. This cleaning process plays a crucial role in the overall pelletizing procedure, which ultimately affects the quality of the final product.
    Headline
    Knowledge
    What Are Cutting and Shaping Tools? From Traditional to Modern Uses
    The term "cutting and shaping tools" might sound a bit unfamiliar, but it actually covers a wide range of tools used in fields from the kitchen and woodworking to industrial manufacturing. In simple terms, a cutting tool is any implement used to shave, scrape, cut, or plane away material. Its main purpose is to use a sharp blade to remove excess from an object's surface to achieve a desired shape, smoothness, or finish.
    Headline
    Knowledge
    "Mysterious Black Box": The Superpower of the Current Transformer
    You might be familiar with your electricity meter, but do you understand that sturdy black "box" next to the meter at your home or office? To a professional, this unassuming device has a powerful name: Current Transformer (CT). It's not just a random component; it's the "unsung hero" of the entire power system, responsible for safety and precision.
    Headline
    Knowledge
    How Sealing Machines Drive the Sustainable Production of Recyclable Plastic Bags
    Sealing machines are essential in the production of recyclable plastic bags, supporting sustainability through precision, efficiency, and compatibility with eco-friendly materials. These machines offer advanced temperature and pressure controls, which are crucial for sealing delicate bio-resins like NuPlastiQ®. Their versatility allows for the processing of various biodegradable and recyclable plastics, minimizing waste and ensuring high-quality output. Technological advancements such as automation and smart controls improve production speed and reduce energy use. By enabling the manufacture of recyclable bags, sealing machines help businesses meet environmental regulations, reduce their carbon footprint, and satisfy growing consumer demand for sustainable packaging solutions.
    Headline
    Knowledge
    What Is Concentrated Juice? A Comprehensive Guide for the Modern Beverage Industry
    Concentrated juice is made by removing a large portion of water from fresh juice, resulting in a compact, easy-to-store product that retains much of its original flavor and nutrition. Common production methods include vacuum concentration and osmotic distillation, both of which help preserve nutrients like vitamin C and antioxidants. While concentrated juice offers convenience and nutritional value, it often contains high sugar levels and lacks fiber. The global market is growing steadily, driven by demand for healthy, convenient beverages. Key trends include sustainable production, automation, and health-focused product innovations. However, challenges such as sugar content regulations and climate-related crop shortages remain important considerations for the industry.
    Agree