Introduction to Types and Principles of Basic Welding
Knowledge

Introduction to Types and Principles of Basic Welding

Welding is a process that uses "heat" and "electricity" to connect two pieces of metal, and the type of welding metal will also affect the welding results and technical requirements; like many professional skills, welding technology also has different levels of difficulty. First understand the most common types of welding introduction, principle teaching, and skill analysis.
Published: Jul 09, 2020
Introduction to Types and Principles of Basic Welding

Basic welding technology introduction

  1. Shielding Gases

    In most cases, welding is most commonly used in "steel", but aluminum, copper and other metals can also be connected using welding technology, and different types of welding require different shielding gases used by welders, mainly used The reason for helium and argon is that the above are all inert gases, which can withstand extremely high temperatures without dissociation, and are used to protect and isolate the air during welding.

    The use of inert gas welding can avoid oxidation of the welded material and help and ensure that the welded metal has no other contaminants during the welding process, which makes the welding result stronger, safer, and has a cleaner appearance.

  2. Proper Nouns Related to Welding Technology

    When welding, the seam to be connected is formed, called "weld seam". Both sides of the welding seam will be affected by welding heat during welding, and the structure and performance will change. This area is called the "heat-affected zone".

    Due to the differences in workpiece materials, welding materials and welding currents during welding, overheating, embrittlement, hardening or softening may occur in the weld and heat-affected zone after welding, which also reduces the performance of the weldment and affects the weldability; therefore, welding It is necessary to understand and adjust the welding conditions before welding, including preheating the interface of the weldment before welding, heat preservation during welding and post-weld heat treatment, which may improve the welding quality of the weldment. Therefore, to make good welding and techniques, in addition to patient practice, you also need to be familiar with various welding knowledge and principles.

  3. Types of Welding

    There are more than 50 kinds of metal welding methods and types known at present, and most of the welding methods are generally divided into three categories: fusion welding, pressure welding, and brazing.

    • Fusion Welding

      Fusion welding, also known as "melt welding"; as the name implies, is a way to directly heat the workpiece interface to "melted" during the welding process without any pressure; At this time, the heat source heats and melts the interface between the two workpieces to be welded to form a "melt pool", and the molten pool will move forward with the heat source, and finally cool to form a continuous weld to connect the two workpieces into one.

      Features:
      In the process of fusion welding, if the air is in direct contact with the high-temperature molten pool, the oxygen in the air will oxidize the metal and synthesize with the alloy elements of the object; if nitrogen, water vapor, etc. in the atmosphere enter the molten pool, it will be In the subsequent cooling process, defects such as pores, slag inclusions, and cracks were formed in the weld, which affected the quality of the weld.
      Therefore, to improve welding quality, gas is usually used to protect arc welding, and argon, carbon dioxide, and other gases are used to isolate other elements in the atmosphere to protect the arc and molten pool rate during welding;
      Another example is when the steel is welded, adding "iron titanium powder" with a large affinity for oxygen in the coating of the electrode to deoxidize, can protect the beneficial elements manganese and silicon in the electrode from oxidation and enter the molten pool, after cooling can obtain high-quality weld results.

    • Pressure Welding

      Pressure welding, as the name suggests, is to use pressure to make the two workpieces in the original solid-state to realize the bonding between their atoms, so it is also called "solid welding"; pressure welding is often used for resistance In the pressure welding process of butt welding, when the current passes through the connection end of the two workpieces, the temperature rises due to the large resistance there. When heated to the "plastic state", the connection becomes integrated under the action of the axial pressure.

      The common feature of different pressure welding methods is to apply pressure during the welding process without adding other filler materials. The pressure welding methods such as "diffusion welding, high-frequency welding, cold pressure welding, etc." are not melting processes. Once the welding is completed, there is no problem with beneficial alloy elements burning as well as harmful elements intruding into the weld seam, which simplifies the entire welding process and improves the safety and sanitary conditions of welding.

      Because the heating temperature is lower than fusion welding and the heating time is short, the area affected by heat is also small. Therefore, many materials that are more difficult to weld by fusion welding can often be welded to the same strength as the base material by pressure welding with high-quality connectors.

    • Brazing

      Brazing, which is also divided into Brazing and Soldering, is a very widely used welding method. It mainly uses metal materials with a melting point lower than the workpiece itself as the "bonding material", and heats the workpiece and the brazing material to "higher than the brazing material". "The melting point of the material, but the temperature lower than the melting point of the workpiece". Welding the workpiece by using the liquid material to fill the gap between the two interfaces and realize the mutual diffusion between the atoms and the workpiece.

The prospect of welding automation technology

The development of electronic technology, computer microelectronic housing, and automation technology has promoted the development of welding automation technology. Especially the introduction of unit technology such as numerical control technology, flexible manufacturing technology, and information processing technology has promoted the revolutionary development of welding automation technology.

  • The intelligentization of the welding process control system is one of the core issues of welding automation and an important direction for future research. Research on the best control methods should be carried out, including linear and various nonlinear controls. The most representative is the fuzzy control of the welding process, neural network control, and the research of the expert system.
  • Welding flexibility technology is also the focus of research. In future research, various optical, mechanical, electrical technologies and welding technology will be organically combined to achieve precise and flexible welding. Using microelectronics technology to transform traditional welding equipment is a fundamental way to improve the level of welding automation. It is a current research direction to combine CNC technology with various types of welding mechanical equipment to improve its flexibility; also, the combination of welding robots and expert systems realizes functions such as automatic path planning, automatic correction of trajectories, and automatic control of penetration. Is the focus of research.
  • The integration of the welding control system is the integration of people and technology and the integration of welding technology and information technology. The information flow and material flow in the integrated system are its important components. Promoting their organic combination can greatly reduce the information volume and the requirements of real-time control. Pay attention to the ability to respond and judge human beings in control and computer processing, establish a friendly interface for human-machine, and harmonize humans and automatic systems, which are factors that cannot be underestimated in integrated systems.
  • Improving the reliability, quality stability, and control of welding power supply, and excellent dynamic performance are also the subjects of research. Develop high-performance welding machines that can adjust arc motion, wire feed, and welding torch attitude, can detect the beginning of weld slope, temperature field, molten pool state, penetration status, provide welding specification parameters in time, and actively develop the welding process computer simulation technology. The evolution of welding technology from "skill" to "scientific" roller is an important aspect of welding automation. The first ten years of this century will be a favorable period for the rapid development of the welding industry.

Remarks: Whenever and wherever welding is done, appropriate safety equipment, including welding helmets, welding gloves, welding apron, and appropriate clothes, should be completely worn.

Published by Jul 09, 2020 Source :1on1

Further reading

You might also be interested in ...

Headline
Knowledge
What is Laser Cutting and Uses?
There is more than one type of laser cutting. It can use different medias to generate lasers of different wavelengths, so the scope, characteristics and functions of the applications are different. In the following, the article will take you to understand the uses of laser cutting in different fields, so that you can better understand the laser cutting technology.
Headline
Knowledge
What is A Punch? Introduction of Punching Principles, Types and Materials
A punch, also known as a punch press, is a forming process technology. There are many kinds of it. Due to different structural principles, the price and processing effect will change in response, but they all have the same structure. With the rapid development of the stamping industry, competition in all walks of life has increased. "Punches are also used in various industries, such as aerospace, education, auto parts, diving equipment and so on.
Headline
Knowledge
What is an Injection Mold?
An injection mold is a tool for producing plastic products; it is also a tool for imparting complete structure and precise dimensions to plastic products. Because the production method is to inject the plastic melted at high temperature into the mold through high pressure and mechanical drive.
Headline
Knowledge
What is a Belt Drive?
A method of transmitting rotational force between two separated shafts using pulleys and belts. The rotation speed ratio is inversely proportional to the diameter of the two pulleys, and it can slide when the load is excessive to prevent mechanical damage.
Headline
Knowledge
What Do You Know About Planetary Reducer?
Planetary reducer has been in existence for more than 30 years. During this long period of time, planetary reducer has gradually entered the field of automation from only appearing in high-end equipment in Europe and America, and has been widely used in machine tools, semiconductors, and packaging industries in recent years. The equipment in the medical food industry, aerospace and other fields will be used with planetary reducers. High, medium and low power servo motors with planetary reducers have become standard. What are the applications and advantages of planetary reducers? This article will let you know more about planetary reducers.
Headline
Knowledge
What are the Classifications of Packaging Equipment?
Packaging involves all walks of life. Manufacturers that produce physical products and need to enter the circulation field all need packaging processes, especially in light industry, and packaging equipment is indispensable. With the development of all walks of life, more and more industries use packaging equipment to reduce the labor intensity of the packaging process, improve product quality, reduce investment costs, and improve the labor environment. In the following, we are going to learn more about the common classifications of packaging equipment.
Headline
Knowledge
Safety and Use of Woodworking Machinery
Woodworking machine, as the name suggests, is the mechanical equipment used in wood processing. It is a variety of cutting and processing equipment used in the process of sawing logs and processing them into wood products, and furniture machinery is an important part of woodworking machinery. Woodworking machines are the same as machine tools, and can be divided into milling machines, lathes, planers, drilling, rotary cutting, sanding, etc. according to different processing methods. However, do you understand the safety and use of woodworking machinery? Check out the following.
Headline
Knowledge
What is the Importance of Lithography Technology and Mask Aligner in Chip Manufacturing?
Lithography is the most important processing technology of integrated circuits and the most critical technology for manufacturing chips. In the entire chip manufacturing process, the implementation of almost every process is inseparable from the technology of lithography.
Headline
Knowledge
What is A Switching Power Supply? Through Principal Analysis, Understand the Basics In 3 Minutes!
Many people do not know about switching power supply and have always thought that is similar to a linear power supply. Actually, there is difference. The following will explain the principles of basic regarding switching power supplies. Learn with us now!
Headline
Knowledge
Basics to An Electronic Connector
Electronic connectors are also often referred to as circuit connectors, electrical connectors, and conductor devices that bridge two conductors on a circuit so that current or signals can flow from one conductor to another. An electronic connector is a motor system that can provide a separable interface to connect two secondary electronic systems. Simply put, the components used to complete the electrical connection between circuits or electronic machines are called connector.
Headline
Knowledge
What is A KVM Switch?
KVM switches allow you to control multiple computers from a single keyboard, monitor and mouse, increasing productivity, saving space and money. This exclusive feature also provides IT administrators with multiple computers or servers, centralized real-time updates and maintenance.
Headline
Knowledge
What is A Punch? Introduction of Punching Principle, Types and Materials
A punch, also known as a punch press, is a forming process technology. There are many kinds of it. Due to different structural principles, the price and processing effect will change in response, but they all have the same structure. With the rapid development of the stamping industry, competition in all walks of life has increased, and it is applied to various industries, such as aviation, education, auto parts, diving equipment and so on. In order to give you a clearer understanding of this technology, the following will introduce you to the structure, types and materials of the punch.
Agree