- Showing results for
- Metal Processing & Equipment
Metal fabricators looking to take on finishing should know about two of the most common finishing alternatives—liquid and powder coating—and the requirements involved for a company hoping to apply one or both.
Low-temperature treatment is a sub-zero process, which is carried out immediately after quenching and is carried out by continuous tempering. The ultra-cold treatment has a significant improvement in the wear strength of the workpiece and has a breakthrough benefit for the stability of the mold size.
Welding is a technique and process for joining metals or other thermoplastics by heating or pressing.
Etching is a technique to process the surface of the object by using chemical strong acid corrosion, mechanical polishing, or electrochemical electrolysis. In addition to enhancing aesthetics, it furthermore increases the added value of the object. Procedures from traditional metal processing to high-tech semiconductor manufacturing are all within the scope of applications of etching technique.
Titanium alloys are widely used in aerospace, chemical, marine, and automotive industries due to their excellent strength-to-weight ratio, corrosion resistance, and ability to maintain strength at high temperatures. However, the disadvantages of titanium alloys are poor thermal conductivity and strong reactivity with tool materials. Their high strength, and low elastic modulus make them difficult to cut materials.
Build a production-demand docking platform with national influence and demonstration effect, accelerate the promotion and application of domestic smart equipment, stimulate market demand, implement demand-based supply, build a full ecological chain of smart manufacturing, and promote the development of the robot and smart equipment industry in the region. Through the strong cooperation between...
In the machining process, as the tool cuts off the unnecessary material from the workpiece, a cutting force will be generated on the workpiece. To resist the cutting force and allow the cutting process to be completed, the workpiece must be firmly clamped on the machine tool. The device that positions and clamps the workpiece is called a fixture. The device that holds and guides the cutting tool is called a jig.
Casting is most commonly used to create complex shapes that would otherwise be difficult or uneconomical to make using other methods. Metal casting processes have been known for thousands of years, and have been widely used for creating sculptures, jewelry, transportation, weapons, and tools.
Polishing refers to the use of mechanical, chemical, or electrochemical action to reduce the surface roughness of the workpiece to obtain a bright and smooth surface. It includes the modification of the surface of a workpiece using polishing tools and abrasive particles or other polishing media.
Thermoforming or vacuum forming is a common method of processing plastic materials, and vacuum formed products are ubiquitous in daily life. The process involves heating a plastic sheet until soft and then placing it over a mold. A vacuum then draws the soft sheet into the mold. The sheet is allowed to cool and is then removed from the mold.
Metal spraying is the process that uses compressed air or inert gas to spray molten, corrosion-resistant metal onto a metal surface to form a protective coating.
A hydraulic press is a machine that uses hydraulic pressure to process metal, plastic, rubber, wood, powder, and other products. It is commonly used in pressing processes and press forming processes.
Direct Energy Deposition (DED), also known as metal laser cladding, is one of the methods used to fabricate metal workpieces by additive manufacturing technology.
A unique industry structure has developed in Taiwan over the years. Through its role as an industry cluster, Taiwan provides the flexibility and cost-effectiveness other markets cannot offer. Taiwan’s strong focus on manufacturing is one of the reasons for the high demand for quality metals and machinery. International Metal Technology Taiwan (iMT Taiwan) integrates the entire supply chain of t...
Power & Alternative Energy:
The Power & Alternative Energy Asia Exhibition is the biggest specialized Power & Alternative Energy event in Pakistan, covering power generation, transmission and distribution, development of newer sources of energy saving technologies.The Exhibition welcomes leading manufacturers and suppliers’ of equipment and services for the sectors:electric, hydr...
The annual trade event for metal workers
Do you want to discover the latest developments and innovations in the metal industry and meet your relations? Then visit METAVAK on October 5, 6 and 7, 2021 in Evenementenhal Gorinchem.
The last edition of METAVAK went very well!
The national vakevent for the metal sector, it was on the 5th, 6th and 7th of October in the Evenemen...
Who Should Attend METALCON?
As the only event entirely devoted to the application of metal in industrial, institutional, light commercial and residential products, METALCON is a must-attend for CEO’s, presidents, principals, senior management, project management, contractors, architects, and engineers from construction, manufacturing and wholesale companies including.
Explore an...
Metal-Expo2020: the Exhibition of the BraveMetal-Expo 2020- the 26th International Industrial Exhibition finished in Moscow on November 13. The event became the only steel industry exhibition held in the world since the first lockdown.More than 300 steel and steel–related companies arranged their expositions at VDNHa fairground on November, among them 230 Russian compani...
Exhibition Promotion
Our resources bring you a greatest success.
Two organizers of the exhibition insisted on cumulating,mastering and updating the heavy machinery buyers’s database through channels, media, domestic and foreign partners in past 10 years. Now there is more than 150,000 buyers with limited data, which has 30% more in an active procurement needs. 80,000 visitors ar...
Agree