Overview of the Global Machine Tool Market Prosperity in 2018
Market News

Overview of the Global Machine Tool Market Prosperity in 2018

The China-US trade war has impacted the global economy. Under this volatility, let's take a look at the 2018 machine tool market overview. The major consumer countries of global machine tools are China, the United States, Germany, Japan, Italy, South Korea, India, Mexico, Taiwan, and Russia.
Published: May 26, 2020
Overview of the Global Machine Tool Market Prosperity in 2018

Global Machine Tool Market Prosperity

2018 bids farewell to the beautiful economic situation of high growth, low inflation, and low-interest rates. The global economy has turned from stable to turbulent. Since US President Trump advocated the "United States First" policy, on the basis of "unfair trade", it is launching After the investigation of trade transactions, the United States has successively imposed punitive tariffs on goods imported from mainland China. This US-China trade war has continued to burn from July 2018 to the present.

Gardner Publication, Inc. released the 2018 Global Tool Machine Production and Sales Survey Report, pointing out that the total consumption of global machine tools has not changed much, and it has grown at a slow rate. Compared with 2017, the total consumption increased by nearly $ 4.1 billion, an increase of 4.6%. Among the major machine tool consumer markets, Italy, India, and Thailand have more impressive growth performances, each with a growth rate of 22% to 26%. However, the negative warning of the decline in consumption in the Chinese market cannot be ignored.

The trade war is not only spreading in mainland China but also impacting global economic development. The tight trade situation has weakened corporate confidence and inhibited spending and investment. The International Monetary Fund (IMF) President Lagarde also said that US trade with China If the war is not resolved, it may pose a risk to the global economic outlook. The struggle between the two countries is not only to gain economic and trade dominance but also to focus on future technological hegemony. Therefore, the kinetic energy of digital transformation may become the power for enterprises to transform in this battle.

Due to the increasing trade friction between the two major economies of the United States and China, tariffs have continued to be used as a means of retaliation and anti-retaliation. Although both parties have proposed other economic policies as compensation, the negative impact is still difficult to be suppressed And even let the trend of increasing global trade subside. Affected by the two major economies of the United States and China, the Asian economy has been greatly impacted. Although the overall performance is more stable than other regions, the uncertainty of economic trends has increased with the increase in international variables. Part of the European Union will stop quantitative easing policies in European banks, Brexit, the French yellow vest resistance movement, and the resurgence of the Austrian and Italian populism. The economic growth forecast is revised. For example, the IMF had previously forecast that the global economic growth rate will be revised down from 3.5% to 3.3%, which is the lowest economic growth forecast since 2010.

Gardner Publication, Inc. 2018 World Machine Tool Survey (2018 World Machine Tool Survey) pointed out that the global machine tool market consumption continues to grow except China, and the continued growth of the market is gratifying, but the negative warning of China's consumption decline Not to be ignored. From the overall data, the total consumption of global machine tools has not changed much, and it has moved forward at a slow pace. In 2018, the global consumption of machine tools was about 91.9 billion US dollars, an increase of nearly 4.1 billion compared with the total consumption of machine tools in 2017. Although the growth rate of the US dollar is slightly lower than the 6.9% in 2017, there is also a 4.6% increase.

The major consumer countries of global machine tools are China, the United States, Germany, Japan, Italy, South Korea, India, Mexico, Taiwan, and Russia. The sum of the consumption of the top 15 machine tool consumption markets accounts for 85% of the overall machine tool consumption market. The market share of the top 5 machine tool consumption countries is as high as 64%, while China and the United States are respectively It ranks first and second in the consumption rankings, so the impact of changes in China and the United States and their economic and trade policies on the overall consumption of machine tools should not be underestimated. According to Gardner statistics, China has been the leader in machine tool consumption since 2002. From 2009, the average consumption amount reached more than 35%. Until 2018, due to the trade war, China's machine tool consumption accounted for 31.4% of the market share. The total consumption of machine tools was about 28.8 billion US dollars, a decrease of 5.9% compared to 2017.

However, the reduction in the proportion of China's machine tool consumer market also means that the proportion of the consumer market in other countries will change. For example, the top five consumer market rates in the United States, Germany, Japan, and Italy have all increased. Gardner's survey report also found an interesting coincidence. In terms of the United States, in 2018, the US machine tool consumption accounted for 10.4% of the market, the highest point in the past decade. Since the outsourcing and transfer of manufacturing in 2001 in the United States, the consumption of machine tools has been declining year by year, until the financial crisis when President Obama took office, through the renewal of the industry to break the depression caused by the real estate industry bubble, the manufacturing industry has stimulated employment supply and promoted Only after "re-industrialization" and "manufacturing return" did machine tool consumption gradually stabilize.

Statistics show that in the major machine tool consumer markets, Italy, India, and Thailand have more impressive growth performance, with a growth rate of 22% to 26% respectively. Taking India as an example, due to the economic reform and development strategy “Make In India (MII)” proposed by Indian Prime Minister Modi, the policy goal is set at 2025. India ’s manufacturing output will account for 25% of GDP. Coupled with the trade war that made the original manufacturing supply chain in China have the possibility of transfer, or for investors to fancy India's huge market domestic demand, all these factors will accelerate the pace of Indian manufacturing development, allowing the Indian market to be seen as a blue ocean where machine tools create business opportunities.

In addition to China, a small number of consumption growth in the machine tool market is in addition to China, and South Korea and Mexico have decreased by 3.6% and 7.6%, respectively. The decline in consumption in the two markets should also be related to the degree of US-China trade dependence. As far as Mexico is concerned, in the past, under the North American Free Trade Agreement (NAFTA), Mexico was set up as a border factory in the United States. The rapid growth of Mexico ’s manufacturing industry has also led to a continuous increase in the consumption of machine tools. Since then, the relationship between the US and Mexico has become tense and complicated. As the US ’s tariffs are also aimed at Mexico, as Trump recently posted on Twitter, it will be in June (2019) From the 10th, all goods imported into the United States in Mexico will be subject to a 5% tariff, and the tariff will gradually increase to 25%, until Mexico solves the problem of illegal immigration, and will also have a major impact on the manufacturing industry in Mexico. It will also affect Mexico ’s demand for machine tool consumption.

Global machine tool production value

In 2018, the growth rate of the total output value of global machine tools increased synchronously with the total consumption of global machine tools. In 2018, the output value of global machine tools was about 94.6 billion U.S. dollars, which was an increase of 4.1 billion U.S. dollars or nearly 4.6%. The main machine tool producing countries are China, Germany, Japan, Italy, the United States, South Korea, Taiwan, Switzerland, India, Spain, and so on. However, the sum of the production value of the top 15 markets for machine tool production value totals 93% of the overall machine tool production market. The market share of the top 5 machine tool production countries is more than 70%. The main machine tool production countries It is more concentrated than the major consumer markets, and the output value of only a few of the 15 major markets has shown negative growth. In 2018, the output value of China's machine tools was similar to the consumption of machine tools, a decline of 6.5% compared with 2017, a decrease of 1.6 billion US dollars. In addition, China's overall market share of machine tool production also fell below 25%. This is the first time since 2008. The decline in China's machine tool production has caused the market share of other major producing countries to increase In contrast to the steady growth of most production and consumer markets, the decline in China's machine tool market is worrying.

In 2018, the main machine tool producing countries still performed the most brilliantly in India, and their export growth reached 33.5%, far ahead of other major producing countries. Taiwan ranks seventh in the global machine tool production value, and the overall performance is relatively stable. In 2018, the machine tool production value was 4.7 billion US dollars, which was a 7.1% increase from 2017.

According to statistics, the export value of global machine tools in 2018 was nearly US $ 51.6 billion, an increase of 9.5% over that in 2017. The top ten machine tool exporting countries in the world are Germany, Japan, China, Italy, Taiwan, Switzerland, the United States, South Korea, Belgium, and Spain. German exports totaled approximately US $ 10.37 billion, an increase of 6.2% over the previous year. The major export growth categories were grinding machines (23%), electric discharge, laser, ultrasonic machine tools (12%), and lathes (11%). Value accounts for about 70% of production. Japan ’s total export volume was 9.23 billion US dollars, up 10% from last year. The major export growth categories were lathes (20%) and discharge, laser, and ultrasonic machine tools (12%). The export value accounted for nearly 63% of production. %. Taiwan's total export of machine tools is about 3.6 billion US dollars, an increase of 5.3% compared with last year. The main machine types of export growth rankings are grinding machines (16%) and integrated processing machines (14%). Performance is slightly limited.

In 2018, the main importing countries of machine tools were China, the United States, Germany, Mexico, Italy, India, Belgium, Vietnam, Russia, South Korea, and other countries. The growth of major machine tool importing countries and their consumption are mostly positively correlated. China ’s total imports were 9.46 billion US dollars, an increase of 5.8% over the last year. The import growth rankings of major machine types were discharge, laser, ultrasonic machine tools (35%), grinding machines (24%), and lathes (18%). Value accounts for about 32.8% of consumption. US imports totaled USD $ 6.3 billion, an increase of 14.6% compared to last year. The import growth rankings of major machine types were discharge, laser, ultrasonic machine tools (22%), lathes (22%), and comprehensive processing machines (21%). The import value accounts for 65.8% of consumption. German imports totaled USD $ 3.5 billion, an increase of 14.2% from last year, and the import value accounted for 43.1% of consumption. In addition, Belgium ’s ranking can be seen among the major importing and exporting countries. However, Belgium ’s import-consumption or export-to-production ratio is relatively high. Its geographic location, tax regulations, and trade patterns are similar to those of the Netherlands. It is inferred that the demand for machine tools is mainly based on re-export trade.

The machine tool industry is easily constrained by the development of economic and trade situations. Now that the US-China trade war is burning, the two countries are not only fighting for economic and trade dominance but also launching for future technological hegemony. The Cold War's impact and impact on the supply chain can be expected, so digital transformation has become new energy for companies to escape from the difficulties and transformation in this battle. The wave of digital transformation around the world is emerging. In response to the new business model derived from factorization, most companies reverse the past business attitude and invest in changes, from the original technical product orientation to customer orientation, and the relationship between customers from the original linear transaction to circulation Interactive relationship, not only selling a single product technology but selling a complete solution.

According to the definition of the National Development Council, smart machinery is to integrate various smart technology elements, so that traditional mechanical equipment has intelligent functions such as fault prediction, accuracy compensation, automatic parameter setting, and automatic scheduling. The function of differentiated advantages. The scope of practice involved includes the establishment of complete equipment, components, robots, Internet of Things, big data, network physical systems (CPS), sensor networks, etc. The introduction of new technologies to form smart machines has allowed the production capacity to be synchronized with the effectiveness of customer service, allowing digital transformation to be demonstrated and Industry 4.0 to be practiced. In this turbulent era, if you do not follow the trend, upgrade, and transform and build a new foundation for the industry, then the market will eventually be eliminated.

Published by May 26, 2020 Source :maonline

Further reading

You might also be interested in ...

Headline
Market News
Functional Textiles in the World of Wearable Technology
The word "function" originates from Japan, so it is understandable that functional textiles began in various chemical fiber factories in Japan. In the early days, it was emphasized that new materials produce new functions, often first with relevant fiber function technologies, and then looking for new functional applications. What is the "functionality" of textiles? The most incisive "functional" design is multi-faceted. Functions are related to people themselves and their living environment, including comfortable and healthy functions, leisure and sports functions, safety and protection functions. Contains medical and physiological functions.
Headline
Market News
The Primary Challenge of Carbon Reduction in Supply Chains
Supply chain carbon emissions are 11.4 times greater than operational carbon emissions. Therefore, if companies are to move towards net zero, the effectiveness of supply chain carbon reduction will be an important key. However, supply carbon reduction faces two major problems: inconsistent calculation methods and low data transparency.
Headline
Market News
Understanding the Concept of Net Zero Emissions
With the pressure of international net-zero emissions and the clarion call for carbon tariffs in Europe and the United States, countries have formulated relevant policies to devote themselves to energy conservation and carbon reduction.
Headline
Market News
Display Equipment Market: Global Overview and Industry Development Trends
In response to the COVID-19 epidemic, various countries have issued a series of bans, city closures and traffic restrictions, driving the demand for housing, working at home, online shopping, and home entertainment. This in turn has driven the demand for 3C products such as information and communications products. Among these, display panels have shown one of the greatest increases in demand, and the global display screen equipment market grew by 19% in 2020, reaching USD 13.52 billion.
Headline
Market News
Analysis of Global Pneumatic Tool Industry Market
With the development of weapons, machinery, and chemical industries, pneumatic tools have been widely used and developed.
Headline
Market News
Automotive Component Supply Chain
A hidden important market in the automotive supply chain is the automotive after market (AM) which is used to satisfy after-sales repairs, inspections, maintenance, replacement, or modification services, and is an important part of the automotive supply chain.
Headline
Market News
Industry Development of Garment and Apparel Manufacturing in Taiwan
The textile industry was a leading sector in Taiwan's early industrialization stage. The growth and achievements of the textile industry also led to the development of other industrial sectors. The garment manufacturing industries are downstream industries in the textile industry chain. Its upstream includes fiber manufacturing, chemical additives, spinning, weaving, dyeing and finishing, and other industries. The garment manufacturing industry are the processing stage in the industry chain. It is also an important industry that gives added value to textiles.
Headline
Market News
Opportunity Analysis and Industry Forecast of Industrial Valves
The global industrial valve market will reach 85.6 billion U.S. dollars in 2022. From the perspective of product technology leadership, European countries, especially Germany, and the United States, are the main leaders, followed by Taiwan, Japan, South Korea, China and India.
Headline
Market News
About Transportation and Warehousing Industry
With the soaring volume of e-commerce transactions, the demand for logistics is also rising. In the process of industry transformation and upgrading, smart technology has become one of the keys to industry development.
Headline
Market News
Global Market and Industry Trends of Display Equipment
In response to the COVID-19 epidemic, various countries have issued a series of bans, city closures and traffic restrictions, driving the demand for housing, working at home, online shopping, and home entertainment. This in turn has driven the demand for 3C products such as information and communications products. Among these, display panels have shown one of the greatest increases in demand, and the global display screen equipment market grew by 19% in 2020, reaching USD 13.52 billion.
Headline
Market News
3D Printing Makes A New Point for Manufacturing In Silicon Valley
3D printing technology has been widely used in recent years, and it has also allowed the manufacturing industry to evolve into a "smart" manufacturing industry, which can achieve the large output value with the less manpower.
Headline
Market News
Commercial Camera Drones Fly You Over Various Commercial Applications
How to apply camera drones in the commercial field? What are the key technologies of camera drones? This article discusses the application and technology development trend of camera drones in the commercial applications.
Agree