Insights

Work holding system with reduced setup time and process variability.

The quality of the engine's cooling system will affect the overall reliability of the vehicle and the length of the engine's life. Through the operation of various parts of the cooling system, the heat generated by combustion or friction inside the engine and gearbox will be taken away and released into the atmosphere.

Motion control encompasses every technology related to the movement of objects. Motion control is also referred to as Servo Control or Robotics and is implemented in industrial processes to move specific loads in a controlled way. It is the core technology of factory automation and is the real-time management of the position and speed of mechanical moving parts according to the expected motion trajectory and specified motion parameters.

Rapid molding technology is a fast, convenient, and practical mold manufacturing technology. It is especially suitable for the development and trial production of new products, process verification, and functional verification, as well as multi-variety and small batch production.

Life is full of inventions that provide convenient services and entertainment: mobile phones, MRTs, notebooks, computers, cars, etc. These exquisite finished products presented to consumers are all processed by a series of complex processes and assembled. Among them, in the industrial process of the product, the machine tool has a very critical position, without it, it is impossible to produce equipment and parts, so it has won the title of "The Mother of Machinery". However, despite its important role, it is little known. Therefore, in this article, we will expose the state of the machine tool industry, understand its contribution to the manufacturing industry, and extend the visible development in the future.

Blanking is a punching piece used as a blank on the plate. Punching is punching round holes on the workpiece, and it can be performed simultaneously with blanking.

The negative electrode material refers to the raw material that constitutes the negative electrode in the battery. The negative electrode of lithium-ion battery is made of negative electrode active material carbon material or non-carbon material, binder and additive to make paste glue, which is evenly spread on both sides of copper foil, dried and rolled. The key to the successful fabrication of lithium-ion batteries lies in the preparation of negative electrode materials that can reversibly de/intercalate lithium ions.

Drilling machine is a general-purpose machine tool with a wide range of uses, which can process parts such as drilling, reaming, flat plane and tapping. When the drilling machine is equipped with process equipment, it can also carry out boring, and when the drilling machine is equipped with a universal worktable, it can also carry out drilling, and reaming.

The so-called broach refers to the order of size, the rough cutter and the fine cutter. Most of the cutters are mainly installed on the broaching machine, which is called the broach. Broach is a forming tool used for broaching. There are multiple rows of cutter teeth on the surface of the cutter, and the size and shape of each row of cutter teeth increase and change sequentially from the cutting end to the cutting end. When the broach makes a broaching motion, each tooth cuts a certain thickness of metal from the workpiece, and finally obtains the required size and shape.

Wafer-level packaging (WLP) has gained traction over the past decade as the semiconductor industry continues to push for generations of higher-performance chips. Back-end packaging technologies are becoming increasingly important in meeting the demands of low-latency, high-bandwidth, and low-cost semiconductor devices.