Knowledge
CBN turning tools are tightly sintered from boron nitride and tungsten carbide bases. The hardness of boron nitride is next to PCD. It has excellent chemical stability and will not produce affinity with iron, cobalt, and nickel-based metals. Therefore, it is especially suitable for work hardening steel, with a hardness above HRC45. Chilled cast iron and heat-resistant steel (Inconel) are also suitable.
2022-10-31 16:38:23
A wrench is a tool used to turn bolts, nuts, and other objects that are difficult to turn by hand. A wrench is a tool that uses the principle of leverage as its actuation mechanism.
2022-10-31 13:10:19
Different types of milling cutters can be used to cut large amounts of material and leave poor surface smoothness (roughing) or to remove smaller amounts of material but leave good surface smoothness (finishing).
2022-10-27 17:51:51
Sintering refers to the transformation of powdery materials into dense bodies, which is a traditional process.
2022-10-25 16:23:50
Powder injection molding (PIM), including metal injection molding (MIM) and ceramic injection molding (CIM), is a one-shot molding technology that combines high throughput and high precision. This technology has been widely used in many industries to produce various precision parts.
2022-10-25 13:16:05
Metal Injection Molded (MIM) is a high-tech near-net-shape technology that combines traditional powder metallurgy and plastic injection molding processes.
2022-10-25 10:20:39
The shortage of supply in the PMIC market is expected to continue. The key lies in the increase in the supply side. In the future, we should continue to observe the changes in the general environment.
2022-10-24 15:28:47
In the process of metal processing, metal working fluid provides cooling and lubricating effects for various processing operations to ensure the accuracy and quality of the workpiece surface and prolong tool life.
2022-10-21 14:37:06
There are continuous information security attacks against manufacturers around the world. For the manufacturing industry, it is not only necessary to consider the information security layout of the IT side, but also to strengthen the overall protection capability on the OT side to cope with the increasingly rampant cyber-attacks.
2022-10-13 16:21:15
In pipeline construction, the elbow is a commonly used pipe fitting. Because the construction environment is different, the use environment that the pipeline component will face is different, so the types of elbows are also various. There are strict requirements in the processing of elbows. If the processing environment is affected, there will be certain defects after the final elbows are formed, which will affect the quality of the project.
2022-10-05 09:54:40
Hot Topic
Agree