Before getting to know EDM machine, start with understanding the type of EDM machine, including wire EDM, sinker EDM, and hole drilling EDM, and perform metal cutting through electrical discharge machining.

Spark erosion machine is a type of EMD machine. It is precision-machined by releasing current. It is an industrial manufacturing process.

Cutting technology has many different processing techniques, and laser cutting can perform more complex and precise cutting requirements, which is also a common processing technique in industrial manufacturing.

Stamping is a process in which thin walled metal parts are shaped by punches and dies.

In the field of manufacturing processing, common processing methods include broaching, boring, grinding, milling, etc.

Aerospace components must guarantee personnel safety and facilitate the optimal performance of high-precision instruments and machines.

Metal fabricators looking to take on finishing should know about two of the most common finishing alternatives—liquid and powder coating—and the requirements involved for a company hoping to apply one or both.

Plastic products can be seen everywhere in daily life, and different plastic products are made through different processing techniques. Plastics manufacturing is the process of making plastic into semi-products or products with practical value. Plastics manufacturing usually includes primary processing and secondary processing of plastics.

Micromachining technology is an important support technology for modern high-tech warfare, and is the development foundation and direction of modern high-tech industries, science and technology.

The principle of grinding precision machining: Grinding is an abrasive precision machining method that uses a lapping tool and abrasive to grind off a thin layer of metal from the surface of the workpiece based on fine machining.

Titanium alloys are widely used in aerospace, chemical, marine, and automotive industries due to their excellent strength-to-weight ratio, corrosion resistance, and ability to maintain strength at high temperatures. However, the disadvantages of titanium alloys are poor thermal conductivity and strong reactivity with tool materials. Their high strength, and low elastic modulus make them difficult to cut materials.

Machining is one of the most important cutting process used in any manufacturing industry. There are many different processing methods and each of these methods may require the use many different cutting tools. With each tool corresponding to a different cutting process, often problems can occur which not only affect the machining accuracy, but also the quality of the workpiece, and can even cause accidents. Understanding the cutting processes, machine tools used, and factors affecting accuracy are important for avoiding problems. Understanding the basics of cutting processing and smart tools will make your machining more effective and require less effort.

Polishing refers to the use of mechanical, chemical, or electrochemical action to reduce the surface roughness of the workpiece to obtain a bright and smooth surface. It includes the modification of the surface of a workpiece using polishing tools and abrasive particles or other polishing media.

Technology today is evolving at a rapid pace, and these changes and progress have resulted in an even greater acceleration of change. One of the greatest areas of change that has come about as a result of COVID-19 outbreak is IT technologies. IT professionals have come to realize that their role will not stay the same in the contactless world of tomorrow.

It's that time of year again, check out the predictions for the most promising emerging technology trends to watch for in 2022. Pay close attention to the following topics as they will be covered in details to see what is happening around the globe.

Ultra-precision machining technology is an important way to improve the performance, quality, service life and reliability of electromechanical products, as well as saving materials and energy. For example: improving the machining accuracy of cylinders and pistons can improve the efficiency and horsepower of automobile engines and reduce fuel consumption; improving the machining accuracy of rolling elements and raceways of rolling bearings can increase the speed of bearings, reduce vibration and noise; improve flatness of processing of magnetic disks, thereby reducing the gap between it and the magnetic head, can greatly increase the storage capacity of the magnetic disk; improving the marking accuracy of the semiconductor device (reducing the line width, increasing the density) can improve the integration of the microelectronic chip, etc.

Milling machines have better chip evacuation because of the nature of their configuration because gravity keeps the chips from falling. This helps improve the surface finish and prolongs the life of the tool.

Heat-Assisted Magnetic Recording (HAMR) is a technology that uses laser heat to first heat highly stable media to assist in the magnetic recording of data.

Plastic products can be seen everywhere in daily life, and different plastic products are made through different processing techniques. Plastics manufacturing is the process of making plastic into semi-products or products with practical value. Plastics manufacturing usually includes primary processing and secondary processing of plastics.

Metal fabricators looking to take on finishing should know about two of the most common finishing alternatives—liquid and powder coating—and the requirements involved for a company hoping to apply one or both.